Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
96 Heritage Softail Nostalgia I have a loose bolt going
96 Heritage Softail Nostalgia I have a loose bolt going straight down from the drivers rear side of the motor it will not tighten. Looks like a 9/16 bolt. Its right behind the rear cylinder … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,075 satisfied customers
I part came in. the bike still jumps and stalls. i have the
helloi part came in. the bike still jumps and stalls. i have the clutch cable extended to the max. what can i do now?kirk(###) ###-####… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
I have a problem. Replaced stater on 2011 HDTV. Forgot how
I have a problem. Replaced stater on 2011 HDTV. Forgot how the gears and spacers goes on … read more
Keith Hurt
Keith Hurt
Service Manager
Certificate of Graduation
51 satisfied customers
I installed a 2" open belt drive on my big twin FLH followed
i installed a 2" open belt drive on my big twin FLH followed there instructions to the tee looked great up until test ride that was the point when realized clutch not fully dissengaging did i miss som… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,075 satisfied customers
I have 2015 Yamaha R6 after 4-5000rpm I get vibration from
Hello I have 2015 Yamaha R6 after 4-5000rpm I get vibration from handle bars as well as footpegs. Bike does not vibrate if it is not going just vibrates when it is going and over 4000rpms. What dou yo… read more
TIMOTO
TIMOTO
Motorcycle Mechanic
Bachelor's Degree
1,337 satisfied customers
I have a 1991 Sportster 1200 (has a side mount horn like the
I have a 1991 Sportster 1200 (has a side mount horn like the larger bikes). I am replacing the horn, but am not sure just how much I should tighten the rubber well nuts. I know they are there to absor… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,075 satisfied customers
guy I bought the bike from took the six-speed tranny..engage..clutch
I have aXXXXXKing that I rebuild from salvage. The guy I bought the bike from took the six-speed tranny out and put his five-speed in. I've had the primary apart several times and hadn't noticed any p… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,075 satisfied customers
Mechanism (the shaft snapped where the shifter lever bolts on)..clutch
I've got a 2007 KX65. I need to replace the gear shifter mechanism (the shaft snapped where the shifter lever bolts on). I'm down to the clutch hub and I can't get the hub nut off. I've tried using a … read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
2006 super: glide..the clutch and reinstall..controls..torque specs
I have a 2006 super glide 35th ann. How do you remove the clutch and reinstall after installing forward controls? What are the torque specs.… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
according: oil leak at the Camshaft chain tensioner cap bolt
I have an oil leak at the Camshaft chain tensioner cap bolt, according to the Clymer manual. How does this work? My bike is an '86 Kawasaki Vulcan 750. VN 750. This is a quote from the Clymer manual, … read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,592 satisfied customers
Tight should i tighten the clutch springs on my CBR600..disengage
How tight should i tighten the clutch springs on my CBR600 FJ 1988, the manuals do not specify and i'm not confident the springs should be tightened all the way because this leaves no play for the clu… read more
Kenny O.
Kenny O.
619 satisfied customers
I took a 94 Fatboy and changed the rims to 18 spoke rims.
I took a '94 Fatboy and changed the rims to 18" spoke rims. I installed a pulley brake combo on the left side. I changed the rear 130mm to a 160mm. Also replaced the rear fender. I centered the tire d… read more
Big Wanda
Big Wanda
H-D Electrical Diag Instructor
Vocational, Technical School
150 satisfied customers
Clutch adjustment...just purchased a 2008 Softail Custom Anniv...two
Clutch adjustment...just purchased a 2008 Softail Custom Anniv...two days ago..upon moving from the trailer into my garage...realized that the clutch lever needs serious adjustment. Have to completely… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,592 satisfied customers
rear wheel keeps losing up about 90% of the spokes..mile..Whats
I have a 2006 streetglide with laced wheels, the rear wheel keeps losing up about 90% of the spokes after a 150 - 200 mile run. Whats up and how to correct this please.… read more
Bill
Bill
Harley Tech
High School or GED
146 satisfied customers
suzuki: you. i need to replace the rear wheel rim and spokes..assy
thank you. i need to replace the rear wheel rim and spokes on my suzuki dr650. i need to relace the assy.and true the wheel. my shop manual does''nt cover it.any tech briefs or comprehensive books or … read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
Harley..the clutch in and the bike in gear I can barely move it
1997 Harley FXD. I thought I had brake drag but I don''t think so anymore. With the clutch in and the bike in gear I can barely move it. If I put it in neutral it moves just fine.… read more
Motorcycle Tech
Motorcycle Tech
1,297 satisfied customers
A harley sportster 1200C valve stem the snapped in half..figuring
how do I repair a harley sportster 1200C valve stem the snapped in half, is this going to involve figuring out how to take the whole wheel off ?if so what is the procedure for this operation… read more
Motorcycle Tech
Motorcycle Tech
1,297 satisfied customers
Bike..pipe..the rear tire, you should be able to remove linkage bolt
I have installed a few lowering kits on these models, The easiest way to do so, is to leave bike on side stand, place a floor jack (or the equivalent) underneath rear of engine, or head pipe. You shou… read more
Fast by Basque
Fast by Basque
High School or GED
60 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,337 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

411 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x