Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
I have a 1986 XL 1200 Sportster. I need to replace the
I have a 1986 XL 1200 Sportster. I need to replace the gasket on the primary cover, as it has started leaking. I removed all the bolts and the gizmo for the shifter, and used a razor blade to detach the old gasket from the primary case on the "bike side". It seems that there is something else holding the cover on? What am I missing? Would it be the shifter cable? Thanks, Suzy … read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
How can I get a softer ride out of my 2008 105th anny edition
How can I get a softer ride out of my 2008 105th anny edition 1200 custom sportster. I have a lot of vibration. The bike vibrates so bad at 45 mph and above that in the rear vew mirrors you can't tell… read more
P.J.
P.J.
595 satisfied customers
Bike..leaks..The tank has had a constant issue with the vibration
Goodmorning, I am in hopes you can provide some guidance in resolving a cronic issue I have had with my bike since I had it customized. I currently own a 97 1200 XL Custom Sporty, the problem is a cus… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,990 satisfied customers
The rear axel is 41t ,the smallest trans sprocket I..factory
hello,I have a 92 1200 xl that I am converting to a trike using a HD servi car rear end.The biggest sprocket I can get on the rear axel is 41t ,the smallest trans sprocket I can find is 19t this leave… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,990 satisfied customers
Theres bracket welded to the frame under the gas tank..mount..bolts
I have a '97 Road King trike (Champion Conversion) There's bracket welded to the frame under the gas tank that holds, what appears to be, a heim type mount, it broke off at the end. On the computer I … read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
1988 g1500: replacing..removing..bolts the shock wont come
I have a 1988 GL1500. I am replacing the rear shock, but after removing the bolts the shock won't come out at the bottom. How do I get it out?… read more
Bike-Doc
Bike-Doc
senior motorcycle technician
Vocational, Technical or Trade Scho
671 satisfied customers
But I just realized that the 1970 sportster was a 900cc engine.
I just bought a frame for my 1974 xlh sportster. The frame is a 1970 in great condition. But I just realized that the 1970 Sportster was a 900cc engine. Will this be a problem? It looks like all will … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,990 satisfied customers
X3: I go to upgrade a new wheel and fender on a 1993 flstc
how tall can I go to upgrade a new wheel and fender on a 1993 flstc ? stock is 16'' x3.5"I it is a stock frame… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
sportster..slight dip..road or with a light weight passenger..my rear
I just purchased a 2008 1200 sportster low (all stock trim). I experience bottoming and scraping around corners, especially if there is a slight dip in the road or with a light weight passenger. I thi… read more
GW DICKINSON
GW DICKINSON
Associate Degree
78 satisfied customers
I recently purchased saddlebag supports, no diagrams or instructions.
I recently purchased saddlebag supports, no diagrams or instructions. Just 2 bars, and 4 bolts (2 large 2 small) I am confused about the front shock bolts and how to properly install them. It looks as… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,990 satisfied customers
I want to change ignition module on my 1998 harley sportster
I want to change ignition module on my 1998 harley sportster 1200 but don't have a clue where it is located… read more
motorhead
motorhead
Master Technician
Vocational, Technical or Trade Scho
76 satisfied customers
2007 Harley Sportster 1200: slow leak at valve cover or cylinder head
2007 Harley Sportster 1200: slow leak at valve cover or cylinder head (2nd seam from the top): replace or not? Is this an R and R job? What should the labor time be? Same engine, sheared rear exhaust … read more
darren
darren
Vocational, Technical or Trade Scho
40 satisfied customers
I recently purchased a new, after market crash bar/engine guard
I recently purchased a new, after market crash bar/engine guard and can not figure out how to attach it to the cycle. Any help would be appreciated.… read more
GW DICKINSON
GW DICKINSON
Associate Degree
78 satisfied customers
classic: heritage..with a dead battery..fender mounting screw..studs
I have a 2002 hd flsts heritage softtail classic with a dead battery. I have my owners manul that tlls me to remove the pillion seat the the springer seat. I removed the fender mounting screw but now … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,990 satisfied customers
hagon nitro rear shocks for my 98 xl sportster..mount bolts..04
I have the chance to buy some Hagon nitro rear shocks for my '98 xl sportster. Are the mount bolts a standard size i.e. will shocks of a '04 sportster fit mine.… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,990 satisfied customers
Im trying to install a new aftermarket flh rear fender
I have a 75 shovel with the stock 4 speed frame . I'm trying to install a new aftermarket flh rear fender . The problem is. When i set the fender in place loose , it sits straight with no clearance is… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
mount..With the shocks tightened to specs there is no bounce..bike
I have a 2006 HD FLHRCI , my left side upper shock mount appears to have been welded in crooked. With the shocks tightened to specs there is no bounce when you push down on the rear of the bike. The s… read more
Motorcycle Tech
Motorcycle Tech
1,297 satisfied customers
2000 sportster 1200 with stock muffler...remove the baffles
i have a 2000 sportster 1200 with stock muffler. can i remove the baffles without hurting performance… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,327 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x