Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
It won't drive clutch can be totally released in 1 st and it
It won't drive clutch can be totally released in 1 st and it doesn't die like it should instead it sits and idles like it's in neutral … read more
Marvin K
Marvin K
Principal Test technician
Associate degree in applied science in automotive technology
17 satisfied customers
My 2001 kawa zrx1200r clutch springs are 33mm (stock
my 2001 kawa zrx1200r clutch springs are 33mm (stock length). They slip a little in top gear when I get in the engine power band (6500-8000 rpm) after stage two mods.So I bought EBC springs but they a… read more
Chris
Chris
Lead Technician
Technical Degree
168 satisfied customers
1998 suziki intruder 1400 Replaced clutch pads and put in
1998 suziki intruder 1400 Replaced clutch pads and put in stronger springs Clutch handle hard to squeeze and doesnt engage into gear… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
Been struggling with clutch issues on my Factory Edition
Been struggling with clutch issues on my Factory Edition 2015 250 SXF. Clutch doesn't want to disengage enough. Gears are tough to shift under stress and first gear has a lot of drag with the clutch i… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
I own a 2006 Kawasaki Vulcan Nomad. My problem: Oil leaking
I own a 2006 Kawasaki Vulcan Nomad. My problem: Oil leaking from the left side of the engine. I removed the side cover and discovered that the oil was leaking around the spacer (that's what the manual… read more
asphaltcycles
asphaltcycles
Motorcycle Mechanic
468 satisfied customers
I ride a 1995 K1100LT with ~62K miles and on a recent trip,
I ride a 1995 K1100LT with ~62K miles and on a recent trip, the clutch actuator adjustment bolt/locknut came completely out of the clutch lever (# XXXXX . Clutch seemed to work fine still...just had m… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
78 model KL250 Kawasaki, 4 stroke. No matter what gear Im
78 model KL250 Kawasaki, 4 stroke. No matter what gear I'm in, it occassionally just seems like you pull the clutch in and obviously, no go. Once I shut the engine down and crank up again OK for a lit… read more
P.J.
P.J.
595 satisfied customers
I have a 1500cc2002wonderful 2002 drifter. New clutches new
I have a 1500cc 2002 drifter. New clutches new slave cylinder new oil new fluids. I just bought it with 4300 miles. Rode 20 miles and clutch slipped so to be safe I took it to a local shop and they ju… read more
Kenny O.
Kenny O.
619 satisfied customers
I have a Kawasaki VN1500 (2001 Vulcan Nomad FI) I replaced
I have a Kawasaki VN1500 (2001 Vulcan Nomad FI) I replaced the clutch diaphragm spring but got one of the 3 smaller limiter springs caught when I bolted the holder back on. I started the bike up and p… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
1999 kawasaki vulcan nomad transmission lock up, when driving
1999 kawasaki vulcan nomad transmission lock up, when driving to my store ( 20 mi. ) less than 1/2 mi from the store after an 70 mph ride on the highway taking off from a traffic light the bike locked… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
my 2003..hood..gear shift (fwd/rev) is loose and has no resistance
my 2003 arctic cat 800 broke down on the trail. Loud clunking noise from under right side of hood. Now the gear shift (fwd/rev) is loose and has no resistance. I think something fell/broke off and tha… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
marine: My 2000 fi 1500 Nomad has problem idling..knock..under load
My 2000 FI 1500 Nomad has problem idling, (won't at all when cold). Has a hard knock like pre ignition when under load on hot days while running high grade fuel. Should this Marine "tap" this machine … read more
Kenny O.
Kenny O.
619 satisfied customers
Its cold the clutch slips...when the engine warms up it..adjustment
I have a 2001 Kawasaki Nomad. When it's cold the clutch slips...when the engine warms up it's ok...is there an adjustment I can make?....thank you… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
concours: kawasaki..disengage..shift lever and sometimes clunks..bled
1991 Kawasaki Concours...seems like clutch does not disengage enuf...hard to move shift lever and sometimes clunks into gear...already have bled Hydraulics till all new fluid came out...i have new hig… read more
TIMOTO
TIMOTO
Motorcycle Mechanic
Bachelor's Degree
1,327 satisfied customers
Kawasaki..the clutch started slipping in 4 & 5th gear..fixes
2000 Kawasaki Nomad 1500 fi, 38k miles. started a few weeks ago the clutch started slipping in 4 & 5th gear. followed the recommended fixes. Replaced the clutch spring with the thicker1600 spring, spr… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
2nd whith a loud clunck Other gears shift smooth and quiet..cluch
I have a 2003 Kawaski Nomad Fi, it seems to shift from 1st to 2nd whith a loud "clunck" Other gears shift smooth and quiet. Do I have cluch issues or is this mornal for a Nomad… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
1500 classic: vulcan..tranmission..bike has 83000 easy, well cared
I have a 2000 vulcan 1500fi classic with a failed tranmission bearing. What are the chances if I simply replace the shattered bearing, the engine will be reliable? The bike has 83000 easy, well cared … read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
The abiliyty to shift and or the clutch slips or the bike..engaged
my 82 flhs clutch seems to lose adjustment soon after i readjust it everytime. then i lose the abiliyty to shift and or the clutch slips or the bike creeps hard even when i have the clutch engaged. my… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,327 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x