Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
I can't get the piston removed from the front fork tube.
I can't get the piston removed from the front fork tube. Doesn't look like there is nothing for a special tool to latch on to so I can remove the small bottom bolt. … read more
JOHN DICIAULA
JOHN DICIAULA
82 satisfied customers
My sons 2006 rm 250 exhaust loads of smoke and oil! It also
My sons 2006 rm 250 exhaust loads of smoke and oil! It also down have the power it used to. I did a compression test and got 90 psi. So i just replaced the piston/rings and it still smokes / blows exc… read more
Mason Surratt
Mason Surratt
Mechanic
Vocational, Technical or Trade School
298 satisfied customers
I am changing the fork oil seals and dust covers on my 1998
I am changing the fork oil seals and dust covers on my 1998 Virago XV 1100 and would like to know the proper step by step method and what tools I need. I have a Clymers manual but it really does not m… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
655 satisfied customers
2001 Harley-Davidson FXST Softail Standard 51,300 miles Recently
2001 Harley-Davidson FXST Softail Standard 51,300 miles Recently discovered a transmission leak not too long (3 weeks) after 5K service. Brought in in to the indy garage that does work on my bike. Was… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,766 satisfied customers
Successfully resolved old stator question. Now, I need help
Successfully resolved old stator question. Now, I need help with confirmed cam cover leak. This 1981 Gs650 leaking in center front of cam cover. Internet research confirms this as a common problem on … read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
I have a 1500a 1998 vulcan kawasaki, i have a leak on left
I have a 1500a 1998 vulcan kawasaki, i have a leak on left side, under cover plate where the clutch hose attaches to bike motor. I took off the three bolts that hold the cover plate. leaks seems to be… read more
Jeff Policky
Jeff Policky
Motorcycle Mechanic
Yamaha,Suzuki,Polaris Technical Tra
2,425 satisfied customers
I own a 1998 Ultra ground pounder. I got the bike in trade.
I own a 1998 Ultra ground pounder. I got the bike in trade. It has sat for a couple years and has leaked some oil on the ground while sitting. Today I went to move it and the back sid of the primary o… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,766 satisfied customers
I have a 2001 Yamaha Silverado 1600/1700 CC I went to check
I have a 2001 Yamaha Silverado 1600/1700 CC I went to check the oil level after a 30 min ride. The bike was turned off and on level ground. When I un screwed the dip stick the oil came out of the tube… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
replace the upper fork tubes on my 1999 dyna wide glide.
I need to replace the upper fork tubes on my 1999 dyna wide glide. How do I do that ? Will a spring shoot out if I unscrew the old tube from the lower unit ? Are there any special tools needed ?… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
1976 honda: goldwing..leak of oil comming from the clutch cover
my 1976 honda goldwing 1000 which I recently bought (has 66k mils on it) suddenly started to show leak of oil comming from the clutch cover at a rate of about a drop/second when parking Any idea why a… read more
Richard
Richard
Senior Mechanic & Technician
2,345 satisfied customers
mate i have a 98 cr250 and blew some seals..clutch..exhaust gasket
mate i have a 98 cr250 and blew some seals at the gear shifter...or at least that's where the build-up is and back when i did it the oil was dripping from under the clutch cover, being the lowest pion… read more
Bike-Doc
Bike-Doc
senior motorcycle technician
Vocational, Technical or Trade Scho
671 satisfied customers
1999 honda: Runs great..During my last ride, it developed an oil leak.
I have a 1999 Honda CR500. Runs great. During my last ride, it developed an oil leak. There is a small "weep hole" about 2" forward of the main oil drain plug on the bottom of the engine, hole is abou… read more
Bike-Doc
Bike-Doc
senior motorcycle technician
Vocational, Technical or Trade Scho
671 satisfied customers
1986 Honda: recently bought..goldwing..had been fully serviced..bike
I recently bought a 1986 Honda GL1200I (goldwing) which I was told had been fully serviced and needed nothing. I'm finding out otherwise. The bike has a bad shaking in the front forks (nearly tank sla… read more
Bikee
Bikee
Bachelor's Degree
74 satisfied customers
1986 honda crx: motorcycle..bike..changing..oil on the freeway
I am a retired motorcycle hobbyist and British bike restorer. working on a 1986 Honda CMX 250. After changing oil, customer was losing oil on the freeway. I rescued it. After wiping the oil down (left… read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
comming..pipes added a extra breather kit still leaking how do i fix
I have a 97 1340 evo about two weeks ago it started to get oil comming from the crankcase breather tube dripping over pipes added a extra breather kit still leaking how do i fix this… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,766 satisfied customers
Harley..After a short ride it started leaking oil..chain..gasket
I just purchased a used Harley 2007 Sportster with 9000 miles on it. After a short ride it started leaking oil from the primary chain inspection cover. I opened the cover and did not see any problem w… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
1998 Honda: Seal..an allen screw on the bottom of the fork..release
1998 Honda XR200R Fork Seal Replacement - Several procedures on the internet, all refer to an allen screw on the bottom of the fork. When I trun the screw nothing happens. It does not screw out or rel… read more
MarcLeonti
MarcLeonti
Vocational, Technical or Trade Scho
40 satisfied customers
I have a 1981 Yamaha Maxim 650, how do I rebuild the shocks on it
I have a 1981 Yamaha Maxim 650, how do I rebuild the shocks on it? What do I need to buy in order to do this? I need a step by step walkthrough.… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Jeff Policky

Jeff Policky

Motorcycle Mechanic

2,425 satisfied customers

Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP

TIMOTO

TIMOTO

Motorcycle Mechanic

1,318 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

Kenny O.

Kenny O.

Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands

619 satisfied customers

Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

kwiggins29059

kwiggins29059

Motorcycle Mechanic

337 satisfied customers

Experience in Harley Davidson and Triumph

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x