Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
Can't get clutch to disingage. Replace clutch, was slipping
Everything looks good and clean , don't understand how this clutch works. Bought used , don't know if parts is missing, need a schematic… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,573 satisfied customers
I have a 1993 Suzuki GSX-R600W. Im having trouble getting
I have a 1993 Suzuki GSX-R600W. I'm having trouble getting the clutch to fully disengage. When I go to put it in gear the bike either stalls or lurches forward. I have put on a new inner and outer clu… read more
TIMOTO
TIMOTO
Motorcycle Mechanic
Bachelor's Degree
1,305 satisfied customers
2001 arctic cat 250 atv semi-automatic. when put in gear or
2001 arctic cat 250 atv semi-automatic. when put in gear or reverse, quad instantly takes off even set to low idle. Changed the centrifical clutch with no fix. Before replacing performed the manual's … read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,573 satisfied customers
Sportster..clutch so i took it apart and it was missing a spring plate
i have a stock clutch on my 2002 1200 custom sportster and it did not have a spring plate i had a problem with clutch so i took it apart and it was missing a spring plate now that i put a spring plate… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,697 satisfied customers
bike..third gear to 4th low gears and high gear seam to be ok..factory
i have a 2008 kx250 f and the bike drags an anchor coming out of third gear to 4th low gears and high gear seam to be ok no one can figure it out this was never a problem before and the sprokets are f… read more
Richard
Richard
Senior Mechanic & Technician
2,335 satisfied customers
reverse..Bike not shifting right. clutch seemed to be draging.
2003 roadking trike conversion champion reverse. Bike not shifting right. clutch seemed to be draging. So far I have adjusted primary,adjusted clutch, and installed new clutch cable. I have not put th… read more
Richard
Richard
Senior Mechanic & Technician
2,335 satisfied customers
my 1999 R1 clutch drag. changed plates etc in my clutch basket
my 1999 R1 clutch drag. changed plates etc in my clutch basket ok and housing ok, noticed that when I remove all plates then clean them in petrol dry them off, replace them select 1st gear with clutch… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
655 satisfied customers
i put the trans in the case it locks the output shaft..wrench..bearing
I have a 1972 sporster when i put the trans in the case it locks the output shaft. I can turn it with a wrench i have the thinest washer on the output shaft before the bearing how can i get clearance?… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,697 satisfied customers
loosened the belt and now it is more of a wining sound..trans..clutch
i have a 1992 flhtc. my problem is under a load it has a growling sound that sounds like it is coming from behind the primary. i loosened the belt and now it is more of a wining sound. i have the tran… read more
Andre Pilon
Andre Pilon
Motorcycle Mechanic
Vocational, Technical or Trade Scho
1,044 satisfied customers
new clutch parts,but the slipper clutch slips,when doing a roll..pack
2005 ZX10 has all new clutch parts,but the slipper clutch slips,when doing a roll on in higher gears.I am a mechanic with 40 years experience.What I need to know is how to thighten up the clutch pack.… read more
Kenny O.
Kenny O.
Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands
619 satisfied customers
concours: kawasaki..disengage..shift lever and sometimes clunks..bled
1991 Kawasaki Concours...seems like clutch does not disengage enuf...hard to move shift lever and sometimes clunks into gear...already have bled Hydraulics till all new fluid came out...i have new hig… read more
TIMOTO
TIMOTO
Motorcycle Mechanic
Bachelor's Degree
1,305 satisfied customers
steve, my 2002 dyna lowrider developed an oil leak..mirror..lite
Steve, my 2002 Dyna lowrider developed an oil leak and is coming from the main sharft seal, I changed the seal and it still leaks, then I changed the seal and the race, and it still leaks. I just chan… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,697 satisfied customers
The process of changing the primary oil seal (..shop manual
I have a 1986 FLH police. Am in the process of changing the primary oil seal (to mainshaft) for the second time in less than forty miles. Have the shop manual, went by the book. Dial indicated mainsha… read more
GW DICKINSON
GW DICKINSON
Associate Degree
78 satisfied customers
Super: accelerate..rotor..neutral with the clutch disengaged you
I have a 2006 dyna super glide and am getting a noise from the primary side, it gets louder when i accelerate it kinda sounds like brake pads dragging on the rotor. when in neutral with the clutch dis… read more
Mike
Mike
Vocational, Technical or Trade Scho
16 satisfied customers
Clutch..bolt..the whole thing to the trans shaft very frustrating bike
i just installed a drag race primary on a bike that i built ultima. the clutch does not seem to be working i put all plates in one thick metal one 8 thin metal ones and 9 fiber ones took it apart 4 ti… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
73 ironhead sportster xlh clutch adjustment is driving me
'73 ironhead sportster xlh: clutch adjustment is driving me crazy. either it doesn't disengage or it drags. too tight and the adjuster in the primary "pops" off. set the tension on the clutch springs … read more
John C.
John C.
Mechanic
High School or GED
154 satisfied customers
I have an 85 FXR it seems to have exsessive vibration, ...
I have an 85 FXR it seems to have exsessive vibration, mainly when I let off the throttle or down shift. I have already changed the front rubber mount and rear isolators. and have realined the rear fo… read more
chopper
chopper
Vocational, Technical or Trade Scho
50 satisfied customers
i have a 07 zx6r and i ran it maybe too hard. Now it has a ...
i have a 07 zx6r and i ran it maybe too hard. Now it has a bad sound from the final gear sprocket, and it sounds like the vales are bet up a little. Is this normal, if it is is it fixable and how long… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Jeff Policky

Jeff Policky

Motorcycle Mechanic

2,425 satisfied customers

Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP

TIMOTO

TIMOTO

Motorcycle Mechanic

1,305 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,044 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

Kenny O.

Kenny O.

Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands

619 satisfied customers

Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

kwiggins29059

kwiggins29059

Motorcycle Mechanic

320 satisfied customers

Experience in Harley Davidson and Triumph

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x