Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
I bought a used suzuki 2000 sv650 a year ago. I decided to
I bought a used suzuki 2000 sv650 a year ago. I decided to do a rebuild as the bike could improve in the area of compression. I took the head and cylinders apart, cleaned off all the carbon, measured … read more
Gary
Gary
Gold Certified GM Technician
Vocational, Technical or Trade School
2,995 satisfied customers
Suzuki motorcycle GS850G: Motorcycle: 1980 GS850G.I'm experienci
Motorcycle: 1980 GS850G. I'm experiencing a significant loss of power that seems to be getting worse, and I have fuel pooling in the air box when the engine runs. Carbs have been rebuilt and the float… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
Hi, I have just rebuilt my top end on my kymco stryker 125,
Hi, I have just rebuilt my top end on my kymco stryker 125, I lined up the camshaft sprocket marks with the flywheel TDC marks but now she won't fire, could I have thrown the timing out 180 degrees ? … read more
Richard
Richard
Senior Mechanic & Technician
2,345 satisfied customers
VT1100 Shadow: Own a Honda VT100 Shadow 1992 dual pistons.
Own a Honda VT100 Shadow 1992 dual pistons. I am rebuilding the motor and can not figure out how to time the motor. Can you help me with this?… read more
Richard
Richard
Senior Mechanic & Technician
2,345 satisfied customers
I have a 71 Honda CL 175. Years ago I bought an instument
I have a 71 Honda CL 175. Years ago I bought an instument called CARB TUNE to synch the 2 carbs. I'm sure you are famliar with this instrument. It meaures vacuum for up to 4 carbs. My problem is I use… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
I have a 1978 Suzuki TS 250C and the tail light dims when the
I have a 1978 Suzuki TS 250C and the tail light dims when the turn signal flashes. It does it when either left or right signals flash. Th tail light and brake light both dim in opposition to the signa… read more
CycleTechChick
CycleTechChick
Service Manager
263 satisfied customers
Jeff..my previous e-mail regarding my Polaris RZR and reply
Jeff: Did you receive my previous e-mail regarding my Polaris RZR and reply to the Rollers NOT being Tappered. Please advise if you received my previous message. Thanks John Sweigart Thrusday, 7:43pm … read more
Jeff Policky
Jeff Policky
Motorcycle Technician
Yamaha,Suzuki,Polaris Technical Tra
2,425 satisfied customers
Honda: Hi mate, can you tell me the resistance reading..pulse
Hi mate, can you tell me the resistance reading for honda crf250x 2004 pulse generator (pick up) thanks… read more
Richard
Richard
Senior Mechanic & Technician
2,345 satisfied customers
im looking for an adjustable windshield for a vtx..my windshield
Im looking for an adjustable windshield for a VTX 1800T. How can I get extra height on my windshield?… read more
Bike-Doc
Bike-Doc
senior motorcycle technician
Vocational, Technical or Trade Scho
671 satisfied customers
1977 honda: rebuilding the engine..goldwing..fitted..push
I am rebuilding the engine of my 1977 Honda GL1000 Goldwing. I have fitted a new countershaft (lay shaft) and bearings. My concern is with the fit of the shaft in the bearings as there is a very light… read more
MrHonda
MrHonda
Vocational, Technical or Trade Scho
398 satisfied customers
1981 Yamaha xs400 special II So the initial problem with
1981 Yamaha xs400 special II So the initial problem with this bike was that, the bike was starting fine with the choke on and then once it got hot would start backfiring and dieing. After it did thish… read more
MrHonda
MrHonda
Vocational, Technical or Trade Scho
398 satisfied customers
my clymer manual says 21mm also but depics setting
I understand ALL of ur answer & agree! my CLYMER manual says 21mm also but depics setting with float open & ADJ. tang thats limmits opening of float & nothing about closed? -A 1st. 4 me a spring loade… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
I have a 1979 Kawasaki KZ650 engine with compression issues,
I have a 1979 Kawasaki KZ650 engine with compression issues, meaning I have zero in one cylinder and 30; 30; 150. The engine was taken apart before I got it. I followed the clymer's manual on assembly… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,584 satisfied customers
I just bought a shifter kart with a cr125. How can I tell the
I just bought a shifter kart with a cr125. How can I tell the year of the engine top/bottom. I don't know if it's a 99 or an 01.… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,584 satisfied customers
1984 honda: my bike to the dealership because it was slipping..rebuild
I have a 1984 honda v1100s sabre v65 and took my bike to the dealership because it was slipping out of 6th gear constantly. They concluded it was the transmission. I was going to take the engine compl… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Just bought a used 2006 Honda VT750C Shadow Aero. The rev
Just bought a used 2006 Honda VT750C Shadow Aero. The rev limiter seems to be kicking in about 4,000 RPM (38 MPH in first gear and 60 MPH in 2nd gear) which seems low. What is the factory setting supp… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
1986 Honda: rebuilt engine..ignition coil...7 ohms of resistance which
I have a 1986 Honda XR600R. I have just rebuilt engine and am now having electrical spark issues. Have tested everything as to manual directions, the ignition coil tests at .6-.7 ohms of resistance wh… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
1974 honda: rattles..neutral..I depress the clutch it stops
I have a 1974 Honda CB 750 motorcycle the transmission rattles when in neutral, it will quiet down and then come back, when I depress the clutch it stops. Thanks Phil39401.7474060532… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,609 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x