Motorcycle

Motorcycle questions? Ask a mechanic.

Ask an Expert,
Get an Answer ASAP!

Related Motorcycle Questions
I have a ktm 450 excr 2008. Rebuilt the motor after the
i have a ktm 450 excr 2008. Rebuilt the motor after the bearing on the output shaft failed. Now the motor is making a knocking sound which seems to come from the top end. I have checked and reset the … read more
Chase Capicotti
Chase Capicotti
Ducati Tech 1
33 satisfied customers
I have a 1978 honda 400tII i set the timing the t on the
hi i have a 1978 honda 400tII i set the timing the t on the rotor and the line on the timing chain sproket never align the bike start but i dont get high rpm … read more
K. Wiggins
K. Wiggins
ASE Certified Technician
Associate Degree
3,568 satisfied customers
I found a small amount of oil leaking out of my ktm exc 350
I found a small amount of oil leaking out of my ktm exc 350 f cam chain tentioner plug found plug not fully tighten can I tighten it with out removing the tentioner… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
654 satisfied customers
I have a 2008 KTM sx-f bike. One day with the clutch fully
I have a 2008 KTM sx-f bike. One day with the clutch fully in at a stand still the bike seem like it was going to die so I revved it pretty good and the clutch engaged and took me for a run. Any ideas… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,335 satisfied customers
I have a Honda cbr 600 f4i and I need too change the cam chain
I have a Honda cbr 600 f4i and I need too change the cam chain tensioner but I was told by the Honda dealer that I had too have someone too keep the motor from turning while I was changing this part. … read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
2007fat boy only done 10000 Kim's. Making rattling noise bottom
2007fat boy only done 10000 Kim's. Making rattling noise bottom of engine and a sucking air sound… read more
P.J.
P.J.
595 satisfied customers
Hi , I recently purchased an 06 ktm 250 sx-f. After checking
Hi , I recently purchased an 06 ktm 250 sx-f. After checking valve clearences I took the bike for a ride came back home and noticed oil all over the motor. Upon further investigation I noticed a crack… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
The cam chin and tensioner look fine it comes and goes..bike..rpm
hi i have an intermitent knocking coming from my cbr 1000rr5 have checked the valve clenances and the cam chin and tensioner look fine it comes and goes there mainly at idle if i blip the motor it som… read more
Jeff Policky
Jeff Policky
Motorcycle Mechanic
Yamaha,Suzuki,Polaris Technical Tra
2,425 satisfied customers
-tightened the tensioner bolt on my kawasaki klr 650
I over-tightened the tensioner bolt on my kawasaki KLR 650 and now the bolt spins freely. How much trouble did I just myself into? Thanks… read more
Richard
Richard
Senior Mechanic & Technician
2,334 satisfied customers
Bike..rebuild..4th is the same as 1st,the drive chain shaft seems
Hi, i just bought a ktm 525 sx,the bike had a rebuild by former owner,but he has done something wrong.I got the bike at bargain price,the bike starts and sounds fine until you put it in gear.The bike … read more
oldracer95
oldracer95
Tech
Associate Degree
62 satisfied customers
The cam chain tensioner from my 99 250 ninja to lube it..intake
I removed the cam chain tensioner from my 99 250 ninja to lube it as stated on many forums. I set the engine at #1 tdc and when i removed the tensioner the intake cam moved. How do I get it back?… read more
justjaymz
justjaymz
motorcycle technician
Vocational, Technical or Trade Scho
28 satisfied customers
set of rings in it and i can not get the timing right can u give me
i have a 1984 suzukilt 125 i took it apart to put in a set of rings in it and i can not get the timing right can u give me some kind of idea on how to time… read more
justjaymz
justjaymz
motorcycle technician
Vocational, Technical or Trade Scho
28 satisfied customers
Tight..a rattling sound in the top end like loose timing chains
Removed engine to replace timing chains. Chains seem tight. Is their something else that would make a rattling sound in the top end like loose timing chains?… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
I was going down road wont turn over no headlight..tail..piston
my '03 800 vulcan just quit while i was going down road wont turn over no headlight have tail and blinker light the cycle shop said piston was bent would that make it not turn over… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
2003 CRF150. Its been altered. It has a BBR 175cc big bore kit.
I have a 2003 CRF150. It's been altered. It has a BBR 175cc big bore kit. Came with cam, exhaust, rev limiter, etc. This bike out powers my CRF 230. It has been a really nice set up for 2-3 years unti… read more
Graham Percival
Graham Percival
Manager
Vocational, Technical or Trade Scho
94 satisfied customers
suddenly lots of slack in my cam chain on a 1980 suzuki GS1100
suddenly lots of slack in my cam chain on a 1980 suzuki GS1100 withonly 4 thousand miles on it. Tried to retime it, but you can move the crank about 20 degrees before the chain stgarts to move. Do I h… read more
Doug E.
Doug E.
Vintage M/C restorer
Vocational, Technical or Trade Scho
2,485 satisfied customers
Suzuki: piston, rebuilt whole top end..timing..compression..knocking
i have a 2003 ltz400 suzuki atv, i dropped two valves that broke knocked a hole in piston, rebuilt whole top end, set the timing according to the book, now i have no compression. what would cause this… read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
bike is almost showroom condition..jumped..tensioner..my mechanic says
I have a1983 cb650sc nighthawk This bike is almost showroom condition however the cam chain jumped the cogs push starting it. how much of a job is it to replace the tensioner and reset a new chain. (m… read more
Ski Doctor
Ski Doctor
Owner, operator
Vocational, Technical or Trade Scho
530 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Jeff Policky

Jeff Policky

Motorcycle Mechanic

2,425 satisfied customers

Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP

Louie

Louie

Technician

1,451 satisfied customers

25+ yrs. experience

TIMOTO

TIMOTO

Motorcycle Mechanic

1,246 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,032 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

Kenny O.

Kenny O.

Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands

619 satisfied customers

Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x