Motorcycle

Motorcycle questions? Ask a mechanic.

Ask an Expert,
Get an Answer ASAP!

Been trying to identify this cam I have for my 93 evo. On…

Customer Question
Been trying to identify this...
Been trying to identify this cam I have for my 93 evo. On one lobe it's etched 114-325. Next lode it's etched 14 02. Timing gears 7-0004B
Submitted: 1 year ago.Category: Motorcycle
Show More
Show Less
Ask Your Own Motorcycle Question
Answered in 54 minutes by:
8/2/2017
Motorcycle Mechanic: Steve, Motorcycle Mechanic replied 1 year ago
Steve
Steve, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 7,282
Experience: 30+ yrs. experience, MMI, HD technician, HD early, engine rebuild/performance, bike builder, kit bike program manager, CCI 2001-2004
Verified

http://www.cranecams.com/bulletins_listview.php?s_id=7

it's a Crane cam. you'll have to contact Crane for the specifics. see contact information on link, above.

Steve

Ask Your Own Motorcycle Question
Motorcycle Mechanic: Steve, Motorcycle Mechanic replied 12 months ago
let me know if you need more help. if not, please leave a POSITIVE RATING. thank you, Steve
Ask Your Own Motorcycle Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a motorcycle mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask Steve Your Own Question
Steve
Steve
Steve, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 7,282
7,282 Satisfied Customers
Experience: 30+ yrs. experience, MMI, HD technician, HD early, engine rebuild/performance, bike builder, kit bike program manager, CCI 2001-2004

Steve is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Jeff Policky

Jeff Policky

Motorcycle Mechanic

2,425 satisfied customers

Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP

Louie

Louie

Technician

1,451 satisfied customers

25+ yrs. experience

TIMOTO

TIMOTO

Motorcycle Mechanic

1,246 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,032 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

Kenny O.

Kenny O.

Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands

619 satisfied customers

Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

< Previous | Next >

Related Motorcycle Questions
I have an 80inch EVO with 10.5 SE pistons and SE heads with
I have an 80inch EVO with 10.5 SE pistons and SE heads with a Woods W6H cam and have no comp releases and my starter is not liking it and have to use 93 and octane boost to stop the ping .I was wander… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
I have 2, 01 and 02 325 trailbosss, continue to have rear
I have 2, 01 and 02 325 trailboss's, continue to have rear brake problems, I bleed them out works great for couple of rides, then they go back again, they have been doing this since the day we bought … read more
Kenny O.
Kenny O.
Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands
619 satisfied customers
how do i make shure the cam lobes are in the correct position
how do i make shure the cam lobes are in the correct position and timing on a 4 stroke 2010 husky… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,256 satisfied customers
Honda: bike..rebuilt..states that the cam drive gear on the crankshaft
Working on 1983 XR 350 dirt bike. Bought it as basket case, now assembling as complete rebuilt. My area of concern is where my original Honda service manual states that the cam drive gear on the crank… read more
Brian D
Brian D
Genral Manager, shop foreman, dyno tuner
High School or GED
536 satisfied customers
hydraulic..noisy when I first start the bike, but after a few miles
I have a 2004 Harley Sportster XL1200R with 44k miles. Lately it has developed a valve train noise possibly caused by worn hydraulic lifters. It is not noisy when I first start the bike, but after a f… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
83 honda: head gasket..backwards..you line up cam gears
replaced a head gasket on a 83 honda cb550sc put cams back in as repair manual stated but how do you know if your putting the timing mark in the right spot and not 180 degrees backwards how do you lin… read more
Richard
Richard
Senior Mechanic & Technician
69 satisfied customers
According: alignment marks on the crank,breather and cam gears
I have a Crane cam that I am putting in my '98 evo and it came out of a '97 evo. The numbers on the cam gear are #7-0001B. according to the bikes shop manual there are alignment marks on the crank,bre… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
My bike was replaced with older non fuel injected 80ci evo..sits
Hi Motor on my bike was replaced with older non fuel injected 80ci evo trying to find what year it is so parts ordering is easer it sits in a 2005 roadking if you can help thanks Ed… read more
Brian
Brian
CARS SUCK! CUSTOMS & REP, OWNER
Vocational, Technical or Trade Scho
211 satisfied customers
Typical evo sluggish trying to accelerate at 70mph..coil..noticeable
Have a 99 heritage (evo)--Typical evo sluggish trying to accelerate at 70mph---have v&h longshots,jetted,k&n filter. Just added spyke igni. and crane hi-4 single fire coil.Very noticeable improvement!… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
Super: cylinders..rebuild..cam, and D- shape the intake ports
What is the largest I can bore my stock evo cylinders and maintain dependability? I am going to rebuild the top end on my 93 Ultra this winter. I am running a S&S Super E, Vance and Hines Pro Pipe, I … read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
Back together..pistons..i correctly set the timing gears
I've got a 67 sporty that ive been putting back together. I lined up the notches on the gears but the tappets are all the way up (valves open) and so are the pistons. Where do the pistons need to be w… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
Rebuilt..the cam in the proper position so the timing..top dead center
I just had the head on my 2007 CRF 450 rebuilt. Prior to instalation,how do I know the cam in the proper position so the timing can be set? How do I know the pistion is at top dead center… read more
TechScooter
TechScooter
Service Foreman
Technical, And Factory Honda Traini
136 satisfied customers
pulled down my bike and done a new piston, rings and rod..worn..gears
hi i have just pulled down my bike and done a new piston, rings and rod due to a worn small end on the rod.... but i have just noticed that the cam gears have no marks on them and i was wondering how … read more
Ski Doctor
Ski Doctor
Owner, operator
Vocational, Technical or Trade Scho
530 satisfied customers
i have an early 85 softail with a 4 speed kicker. I am a mmi
i have an early 85 softail with a 4 speed kicker. I am a mmi grad. recently i put on a new cam cover. the cam cover i had on it is an 82 part number. the one i put on is a 86 part number.the problem i… read more
Steve
Steve
Motorcycle Mechanic
Vocational, Technical or Trade Scho
7,282 satisfied customers
The cam chain tensioner problem on the 88 ci motor and is the 96 ci
does the 80 ci hd motor have problems as critical as the cam chain tensioner problem on the 88 ci motor and is the 96 ci motor not affected by the tensioner problem?… read more
Big Wanda
Big Wanda
H-D Electrical Diag Instructor
Vocational, Technical School
150 satisfied customers
1993 honda: cannot seem to get the timing right now i come..proceedure
1993 honda cb 250. Hi i have had the motor in pieces and cannot seem to get the timing right now i come to put it together again, please can you tell me the proceedure.… read more
Mrmocycle
Mrmocycle
Motorcycle Shop Owner
Vocational, Technical or Trade Scho
94 satisfied customers
2000 polaris Trail Boss 325. I installed a new factor carb.
I have a 2000 Polaris Trail Boss 325. I installed a new factor carb. I can't get it to idle. Idle should be 1300 +/- 100 rpm. After warming up the enginen for twenty minutes if I set the idle to 1400 … read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
423 satisfied customers
The flywheel rotated so that the advance timing mark..inspection..cam
I am setting the timing on a 1970 XLCH and have the flywheel rotated so that the advance timing mark is in the middle of the timing inspection hole. The circuit breaker cam follower is not on the high… read more
Bill
Bill
Harley Tech
High School or GED
146 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x