Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
I bought a 1999 1200 Suzuki bandit that had been sitting for
I bought a 1999 1200 Suzuki bandit that had been sitting for a while I rebuilt the carburetors by craindre all of a sudden One Day clutch start slipping and I've replaced the clutch plates rebuilt the… read more
PhillL128
PhillL128
Owner, Head Mechanic
Associate of Science
223 satisfied customers
I have a 2003 honda vtx 1800r when you put the kickstand up
I have a 2003 honda vtx 1800r when you put the kickstand up start the bike in neutral holding the front brake and clutch lever shifting into first gear the bike makes a loud clunking sound and jumps f… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,584 satisfied customers
I put new fiber pates in my clutch(mean streak 1600) and now
I put new fiber pates in my clutch(mean streak 1600) and now I cant remotely get the new Barnett spring to come close to being tight. Cant figure it out. … read more
Martin B
Martin B
Head Honda & Kawasaki Technician
High School or GED
486 satisfied customers
2001 Kawasaki nomad fi. Replaced the clutch and the clutch
2001 Kawasaki nomad fi. Replaced the clutch and the clutch rod will not go all the way in so the cover with the snap ring will fit. … read more
Martin B
Martin B
Head Honda & Kawasaki Technician
High School or GED
486 satisfied customers
Can't get clutch to disingage. Replace clutch, was slipping
Everything looks good and clean , don't understand how this clutch works. Bought used , don't know if parts is missing, need a schematic… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,584 satisfied customers
Replaced clutch plates and steels in 1987 shadow vt700c,
Replaced clutch plates and steels in 1987 shadow vt700c, went to put pressure plate back on with lifter and bearing in plate and looks to be short clutch and steel and know I have correct amount,what … read more
Kenny O.
Kenny O.
Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands
1,022 satisfied customers
I own a 2006 Kawasaki Vulcan Nomad. My problem: Oil leaking
I own a 2006 Kawasaki Vulcan Nomad. My problem: Oil leaking from the left side of the engine. I removed the side cover and discovered that the oil was leaking around the spacer (that's what the manual… read more
asphaltcycles
asphaltcycles
Motorcycle Mechanic
468 satisfied customers
I have a 86 Honda VT 1100 the clutch wont engage we have removed
I have a 86 Honda VT 1100 the clutch won't engage we have removed the slave separate hydrolics from the clutch. Still the real wheel spins almost freely. It has 12k miles friction plates looked good. … read more
Kenny O.
Kenny O.
Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands
1,022 satisfied customers
I have a Kawasaki VN1500 (2001 Vulcan Nomad FI) I replaced
I have a Kawasaki VN1500 (2001 Vulcan Nomad FI) I replaced the clutch diaphragm spring but got one of the 3 smaller limiter springs caught when I bolted the holder back on. I started the bike up and p… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
88 vmax, when it gets warm the clutch slips..serviced..fitted
88 vmax, when it gets warm the clutch slips almost to the point of no drive. have just serviced the clutch slave cylinder and fitted new friction clutch plates. dont know what else to do… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Back together..I can shift gears with engaging the clutch
I replaced the clutch spring on my 2000 Nomad with a mean streak spring, also new clutch discs. Put it back together and the clutch handle is so hard I can't pul it it. Also, I can shift gears with en… read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
marine: My 2000 fi 1500 Nomad has problem idling..knock..under load
My 2000 FI 1500 Nomad has problem idling, (won't at all when cold). Has a hard knock like pre ignition when under load on hot days while running high grade fuel. Should this Marine "tap" this machine … read more
Kenny O.
Kenny O.
Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands
1,022 satisfied customers
1985 Harley Sportster XLH 1000 I have just installed new
1985 Harley Sportster XLH 1000 I have just installed new clutch plates, put the clutch boss in position, inner clutch spring seat, clutch spring, spring seat, and then i try to install the snap ring, … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,018 satisfied customers
Kawasaki..the clutch started slipping in 4 & 5th gear..fixes
2000 Kawasaki Nomad 1500 fi, 38k miles. started a few weeks ago the clutch started slipping in 4 & 5th gear. followed the recommended fixes. Replaced the clutch spring with the thicker1600 spring, spr… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
1500 classic: vulcan..bled..wont engage..up bike once no noise
have 2001 vulcan 1500 classic fi used gadgets help site to replace clutch spring used mean streak spring reassembled and have bled clutch but it won't engage and clutch lever feels more like a brake h… read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
my yz 125 90 mod has major clutch slip, it had it when i brought
my yz 125 90 mod has major clutch slip, it had it when i brought it so i put a new clutch in it and it is still exactly the same. i adjusted the cable all the way in and it stalls when you put it in g… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
it goes into a false neutral and I have to stop the bike..pack assy
I have placed a stock 748r slipper clutch into my 998s (bayliss). when down shifting from say3rd to 1st it goes into a false neutral and I have to stop the bike, pull in the clutch and then it will re… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
1500 classic: vulcan..slipping..I had a new clutch..again.
I bought a used 2003 vulcan 1600A classic the clutch was slipping I had a new clutch installed,it lasted for a week and begin to slip again.I am an experienced rider Iwant to know what could be the pr… read more
Christopher
Christopher
Senior Mechanic & Technician
Factory Training
2,435 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,327 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x