How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Motorcycle
Satisfied Customers: 12316
Experience:  25+ yrs. experience
13948492
Type Your Motorcycle Question Here...
Louie is online now
A new question is answered every 9 seconds

2008 can am 800 not pumping fuel have replaced fuel pump

Customer Question

2008 can am 800 not pumping fuel have replaced fuel pump
Submitted: 10 months ago.
Category: Motorcycle
Expert:  Louie replied 10 months ago.

Hi, I’m Louie. Sorry you had to wait awhile but I’ll do my best to help.

Initially and if have not been tried, let's review the basics using a volt/multi-meter:

  • • the fuel pump receives its IGN+12V on its blue/gray wire;
  • • this blue/gray wire is through F5, a 7.5A fuel pump fuse;
  • • this fuse in turn is fed by the IGN+12 through its red/beige wire;
  • • that is switched on by the main relay;
  • • the main relay in turn is powered by an always available red/gray wire from the 30A main fuse from the battery's red wire;
  • equally important to the +12V checks as above described, the fuel pump's black/blue wire must be switched to ground by the ECM.

Related Motorcycle Questions