How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Motorcycle
Satisfied Customers: 12285
Experience:  25+ yrs. experience
13948492
Type Your Motorcycle Question Here...
Louie is online now
A new question is answered every 9 seconds

Gas overflow, drips a lot of gas.... what to do?

Customer Question

gas overflow, drips a lot of gas.... what to do?
Submitted: 12 months ago.
Category: Motorcycle
Expert:  Louie replied 12 months ago.

Hi Greg and welcome to JustAnswer,

Thank you for the question and your patience. Should you still need assistance for information purposes only...

Initially, proposed preliminary tries (if have not been done):

  • • pull down and re-do the carb;
  • • of particular attention to the float (4) and needle valve set (43).
Expert:  Louie replied 12 months ago.

Hi again Greg,

Have you re-checked the float height and if the needle valve is fit when closed?

Customer: replied 12 months ago.
Louis, what are the numbers you referenced in your reply?
Expert:  Louie replied 12 months ago.

The "...pull down and re-do the carb..." has a link to the word carb. Clicking or tapping on carb would open this link; an exploded parts diagram of the carb. The numbers then correspond to the parts for visual reference.