How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Policky Your Own Question
Jeff Policky
Jeff Policky, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2425
Experience:  Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP
Type Your Motorcycle Question Here...
Jeff Policky is online now
A new question is answered every 9 seconds

I have a 07 KTM 65 sx. Im Doing a full rebuild I have cracked

Customer Question

I have a 07 KTM 65 sx. Im Doing a full rebuild I have cracked all the bottom casing all new bits put in. Now when I go to bolt the casing together the bolt near the main shaft when I tighten it seems to clamp to tight and locks the shaft from turning freely. Any help would be appreciated cheers. Brett phelps
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Kenny O. replied 1 year ago.
Hi Brett my name is ***** ***** replaced the main cases and you had to install the bearings into the new parts, you did use new parts correct ?So explain the process you did when installing the l/h case half ? what was your procedure ?Thanks