How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask gomi_otaku Your Own Question
gomi_otaku, Technician
Category: Motorcycle
Satisfied Customers: 3462
Experience:  VW Technician, VW FastTrack, VW Academy, VW Certified
Type Your Motorcycle Question Here...
gomi_otaku is online now
A new question is answered every 9 seconds

Have a 2007 can am outlander 500 with a bent rim. Looking

Customer Question

Have a 2007 can am outlander 500 with a bent rim. Looking for a used one is Will a 2011 800 xtp frame work.
Submitted: 1 year ago.
Category: Motorcycle
Customer: replied 1 year ago.
Bent frame. Need a new frame or used
Expert:  Pete replied 1 year ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.My info is somewhat limited on your model here but I had seen no one else has responded and would like to see if I can help here.If at any time you feel that I cannot help with this please let me know.

I dont have or see the info if a 2011 model will fit and work,you might contact a dealer or repair center that works on this model here to see if they can tell you for sure if it will fit.If it will not you may have to locate a used one at a salvage yard or contact a dealer or repair center for this model to see if they can locate and order one in for you.If these are not options for you here on this let me know so we can continue.

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.

Thanks Pete

Customer: replied 1 year ago.
No help..... I have already done that can't get a strait answers from anyone. I want my money back
Expert:  Pete replied 1 year ago.

I will open your question up for others here to see if someone else can assist further on this as there may be others here that may have more info on what to check or do with this issue.I hope you can get this resolved with ease.No need to reply to my last post here unless it is a last resort as it will keep your question locked to me and others will not be able to view it.If you feel you want to continue to work with me on this feel free to reply at any time but keep in mind in some cases it can be difficult to fully diagnose or help repair this without seeing your vehicle.

Thanks Pete

Expert:  gomi_otaku replied 1 year ago.

There's not a lot of information out there. but it looks like before 2004 was one frame, 2005-2011 was another, 2012 and up was the next version, regardless of engine size.

Customer: replied 1 year ago.
Thanks that helps
Expert:  gomi_otaku replied 1 year ago.

Sure, just takes a little research. Doesn't look like a frame is available from the normal aftermarket/OEM motorcycle parts suppliers like RonAyers.