How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Technician
Category: Motorcycle
Satisfied Customers: 27834
Experience:  17 years automotive training and experience.
Type Your Motorcycle Question Here...
Pete is online now
A new question is answered every 9 seconds

What would cause a c 11 code on a 2000 Hayabusa

Customer Question

what would cause a c 11 code on a 2000 Hayabusa
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Pete replied 1 year ago.

My name is ***** ***** I am a professional here at Just Answer. I noticed that your question had not received a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.

My info is somewhat limited on your model here but I had seen no one else has responded and would like to see if I can help here.If at any time you feel that I cannot help with this please let me know.

This code here looks to indicate a fault with the cam shaft sensor itself or wiring to the sensor causing this issue.I would have the wiring checked to make sure it is all o.k. and if found to be o.k. the sensor itself most likely needs replaced to resolve this issue here.

If more help is needed, use the reply tab to continue our conversation. If no further assistance is needed, kindly rate my service.You can rate at any time and we can continue to work on your question as this will not close out your question.Keep in mind in some cases it can be difficult to fully diagnose or help repair your vehicle without seeing it and I work on delivering the best possible answer from what I see to work with.Thanks Pete.

Customer: replied 1 year ago.
I have already checked the wiring and replaced sensor and still won't start with the c 11 code
Expert:  Pete replied 1 year ago.

If the wiring is o.k. and the sensor is o.k. with this being a circuit fault code this can be the computer itself at fault causing this issue needing replaced.I have seen computers fail before in the past causing a cam sensor fault code with the computer needing replaced.

Thanks Pete

Customer: replied 1 year ago.
It has a Power commander I I is this what u are talking about and if so how do I check it
Expert:  Pete replied 1 year ago.

Is this a computer that controls and monitors the engine components?

Related Motorcycle Questions