How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask RSRBOB Your Own Question
RSRBOB, Technician
Category: Motorcycle
Satisfied Customers: 1078
Experience:  Former Factory Service Rep, Dlr Line Tech, Service Manager, General Manager, Store Owner
Type Your Motorcycle Question Here...
RSRBOB is online now
A new question is answered every 9 seconds

Steve having slight issues after replacing both cam chain tensioners.

Customer Question

Steve having slight issues after replacing both cam chain tensioners. Oil blowing out of tank. Any ideas. Sounds like it's running rough as well.
Submitted: 1 year ago.
Category: Motorcycle
Expert:  Pete replied 1 year ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
If you can re check your work that was done to see if anything was damaged or installed incorrectly or possibly left loose causing issues here.If this is all found to be o.k. let me know.
Thanks Pete
Customer: replied 1 year ago.
I'd like my money refunded as that I never received an answer
Expert:  RSRBOB replied 1 year ago.
Hi.I would suggest checking 2 things. First, make sure you installed the breathers on the rocker support plate in the correct orientation. The umbrella valve should be on top and the brillo pad looking part down towards the rocker support plate.2nd, make sure you did not over fill the oil tank. It holds 3 qts total.RSRBOB