How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeff Policky Your Own Question
Jeff Policky
Jeff Policky, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 2425
Experience:  Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP
Type Your Motorcycle Question Here...
Jeff Policky is online now
A new question is answered every 9 seconds

2001 Polaris magnum 325 possible clutch problem I uploaded a

Customer Question

2001 Polaris magnum 325 possible clutch problem I uploaded a video to watch
Submitted: 2 years ago.
Category: Motorcycle
Expert:  RSRBOB replied 2 years ago.
Hi and thank you for your question.After seeing the movement of the sheave in your video, I suspect the splines on the inside of the sheave are worn to the point of needing to be replaced. The final confirmation of that theory would be removing the sheave from the shaft and inspecting them. I suspect you are going to find wear and the presence of aluminum dust where the splines have been wearing away.Upon reassembly, make sure the proper torque is applied to the nut responsible for holding that sheave on the shaft.If you have any more questions, feel free to ask.Thanks,RSRBOB
Customer: replied 2 years ago.
ok its shot thanks
Expert:  RSRBOB replied 2 years ago.
You are most welcome.ThanksRSRBOB