How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Steve Your Own Question
Steve, Motorcycle Mechanic
Category: Motorcycle
Satisfied Customers: 6987
Experience:  30+ yrs. experience, MMI, HD technician, HD early, engine rebuild/performance, bike builder, kit bike program manager, CCI 2001-2004
Type Your Motorcycle Question Here...
Steve is online now
A new question is answered every 9 seconds

Trying to see if I can determine the problem with bdl clut

Customer Question

Trying to see if I can determine the problem with bdl clutch
Submitted: 2 years ago.
Category: Motorcycle
Customer: replied 2 years ago.
I have a custom built bobber. I am running a 107"" ultima , 5 speed rev tech and a bdl 2" belt drive. I got my carb adjusted correctly did my motor initial start up and started to do a few local break in rides. Yesterday my clutch lost pressure and would not allow me to shift gears. I tried adjustment at cable and adjuster nut. I got pressure to my clutch lever and went to take a test ride and when I engage clutch lever the motor cuts out.
Expert:  Steve replied 2 years ago.
you should disassemble the clutch to see if there are issues.everything you stated points to a problem with the clutch. let me know if you need more hep.Steve

Related Motorcycle Questions