How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Louie Your Own Question
Louie
Louie, Technician
Category: Motorcycle
Satisfied Customers: 12446
Experience:  25+ yrs. experience
13948492
Type Your Motorcycle Question Here...
Louie is online now
A new question is answered every 9 seconds

My 1995 Yamaha banshee with a 350 - 2 stroke engine is pouring

Customer Question

my 1995 Yamaha banshee with a 350 - 2 stroke engine is pouring gas out of the overflows tubes when the gas is on. It is happening out of the right side carb only. have taken carb out and float, needle valve, ect all seems in good working order. What could be the problem?
Submitted: 2 years ago.
Category: Motorcycle
Expert:  Louie replied 2 years ago.
Hi and welcome to JustAnswer,
Thank you for the question and your patience. Should you still need assistance for information purposes only...
Initially and if have not been tried, adjust the float height. Please see instructions at the link below.
https://dl.dropboxusercontent.com/u/92079112/Yamaha%20Banshee%20YFZ350%20Carb%20Float%20Adj.pdf
Still (and again if have not been tried), consider a repair kit particularly for the inlet float valve (needle) and its seat; something like the product shown at the link below.
http://www.ebay.com/itm/CARB-REBUILD-REPAIR-KIT-YAMAHA-YFZ350-BANSHEE-350-2WD-1992-1993-1994-1995-1996-/270470214671?hash=item3ef947f40f&vxp=mtr
Please post back results / observations of the above once tried.