How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Pete Your Own Question
Pete, Technician
Category: Motorcycle
Satisfied Customers: 28246
Experience:  17 years automotive training and experience.
Type Your Motorcycle Question Here...
Pete is online now
A new question is answered every 9 seconds

I have just installed an indicator relocation kit on a 2013

Customer Question

I have just installed an indicator relocation kit on a 2013 dyna, which involved removing fuel tank. I have fully reassembled the bike but it will not fire. All fuses are good, and all ignition lights and electrics operate.
The only thing I can pick out is red security lamp goes off as it should, but after a few seconds comes back on and stays on
Submitted: 2 years ago.
Category: Motorcycle
Expert:  Pete replied 2 years ago.
My name is ***** ***** I am a professional here at Just Answer. I noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
My info is limited on your model here but I see no one else has responded and thought I would see if I can help here.
The security system may be engaged if power was lost to certain electronics when this repair was done.This may need reset by a dealer or service center to correct this here.
Thanks Pete