Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
Installed Arlon Ness Push Rod covers with Screamin Eagle
installed Arlon Ness Push Rod covers with Screamin Eagle Push Rods, making a tapping noise in front cyclnder … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
I just changed my pushrods on my 2016 fat boy s, and now she
I just changed my pushrods on my 2016 fat boy s, and now she wont turnover. getting backfire out of exaust. I put a new coil on it to see if that was the issue and still not working. … read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
I have a 94 fxdwg getting ready to install screamin eagle
I have a 94 fxdwg getting ready to install screamin eagle heads and a se4 cams, stock bore and compression. Is this a good combination and should I look out for any problems?… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
I just installed a screamin eagle stage 2 kit...258 cams...screamin
I just installed a screamin eagle stage 2 kit...258 cams...screamin eagle heads with electric acrs...and wired the acrs as to the instructions...crank motor but won't start....does the ecm need to be … read more
P.J.
P.J.
Technician
751 satisfied customers
I recently put in S&S 509 cams in my 2004 road king. I used
I recently put in S&S 509 cams in my 2004 road king. I used S&S high performance lifters and screaming eagle adjustable push rods. We did all the work at alocal bike shop. Now my eninge in very loud ,… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
installing htcc ported heads 95ci kit with v&h 2 in to 1 pipe..cam
I have a 2000 flhtpi that I will be installing Htcc ported heads 95ci kit with v&h 2 in to 1 pipe what would be a good cam combo for this set up… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
bike..chain..cylinders..cams ,oil pump and upgrading the side bearings
The bike shop will be assemblying the bottom gutting the balance shafts and chain, plugging oil holes that need plugging ect also fitting the pistons and putting cylinders to case as well as setting u… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
What does putting a screaming eagle package on an 883 do for
What does putting a screaming eagle package on an 883 do for its performanceand how much does this cost… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
I have a 01 883 converted with screamin eagle 1200 kit.
i have a 01 883 converted with screamin eagle 1200 kit. what is the valve lash im purty sure the valves need adjustment… read more
Richard
Richard
Senior Mechanic & Technician
2,345 satisfied customers
Cam..lifters..push rods installed in my 95 evo initial adj..bike..ride
recently had new cam and lifters withadjustable push rods installed in my 95 evo initial adj was completed prior to starting .Had bike running last weekend had some noise after engine got hot.my probl… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Electra: spark plugs..rev..stalls..puff of smoke come..run fine
I have a 2007 HD FLHTCU Ultra Classic Electra Glide. I just had the 5000 mile service with synthetic oil and upgraded to SE spark plugs. When I start the bike it chokes and backgfires if I don't hit t… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Intake..Ive heard the 103 kits are not much bang for the buck
I have a '08 fatboy with V&H short shots and programmer, screaming eagle intake. How can I get more torgue for not much $$. I've heard the 103" kits are not much bang for the buck.… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
slip..intake..my lack of power at highway speed or hills (no roll on)
I have a 2005 ultra HD 88ci EFI I'm thinking about replacing my stock pipes/Bassani slip ons with a thunder header pipe I already have a Screamin Eagle race tuner installed and high flow intake. My cu… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
have a 94 1340 cc. I also have a screamin eagle jug and piston
have a 94 1340 cc. I also have a screamin eagle jug and piston kit for a 1550cc 3.740 bore and best I can tell 4.130 stroke. are these compatable? can I install these jugs on this motor and use the ol… read more
motorhead
motorhead
Master Technician
Vocational, Technical or Trade Scho
76 satisfied customers
Replacing..tensioners..2004 Harley-davidson twin cam road king
Replacing primary and secondary cam chain tensioners on a 2004 Harley-Davidson twin cam road king. any advice?… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Engine upgrade questions. I have a 04 TC88B motor. Can I take
Engine upgrade questions. I have a 04 TC88B motor. Can I take a set of stock 2008 (take off parts) pistons,jugs, cams etc from a 96" engine and upgrade the top end of my 88". Will any machining or mod… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
rod..andrews cam 27, 2 into 1 thunderheader and a carb kit
I own two, one a v-rod which I have no problems with power but the second one is a 95 heritage, so would screamin eagle heads and a small bore job like 40 thousands make much of a difference, I can't … read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Cams..fueling..springs..I had the 95, breather, and thunderheader
I have a 2002 dyan with a 95", screaming eagle breather, thunder header. I just installed S&S gear drive cams, screaming eagle push rods, fueling tappets and stronger valve springs. Before the additio… read more
Bill
Bill
Harley Tech
High School or GED
146 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,327 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x