How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Jeremy R. Your Own Question
Jeremy R.
Jeremy R., Mechanic
Category: Motorcycle
Satisfied Customers: 9020
Experience:  15+ Yrs Factory certified technician and business owner.
8380480
Type Your Motorcycle Question Here...
Jeremy R. is online now
A new question is answered every 9 seconds

ranger: replace the drive belt..polaris

Resolved Question:

I need to replace the drive belt on a 1999 Polaris Ranger 6x6. How do I get the cover removed? Then what procedure is needed to replace the belt? I have the cover loose but cannot get it out of the way. Thank You.
Submitted: 5 years ago.
Category: Motorcycle
Expert:  Jeremy R. replied 5 years ago.
Hi, and thank you for letting me try and assist you with your problem.
You have to wiggle the cover around to get it out of the way enough to get your hands on top of the secondary clutch so you can open the clutch up and remove the belt.
To open the clutch you can grab the outer and inner discs and twist them in opposite directions and that will let the clutch open so the belt will fall down in it.
That gives you the slack to pull it off that clutch.
The best way for me to learn is to have someone show me.
CLICK HERE for a video on how to do it.
Customer: replied 5 years ago.
Hi, and thank you for assisting with my problem. According to your answer I assume I am not able to totaly remove the clutch assy. cover to totaly access the clutch assy. for belt replacement. Is my assumption corect? Regards, lee
Expert:  Jeremy R. replied 5 years ago.
You don't have to remove it to change the belt. Just enough to get your hands in there.
You can get it but you just have to wiggle it around and then bend it enough to get it out.
If it's cold you will break it so I don't recommend you try that.
Jeremy R. and other Motorcycle Specialists are ready to help you