Motorcycle

Motorcycle questions? Ask a mechanic.

Ask an Expert,
Get an Answer ASAP!

This answer was rated:

I would like to know how to adjust my clutch..softail..fuel injected…

Hello, I would like to...
Hello, I would like to know how to adjust my clutch. I have a 2004 softail std. 1450 fuel injected. Can you help?
Show More
Show Less
Ask Your Own Motorcycle Question
Answered in 13 minutes by:
6/25/2010
....
...., ....
Category: Motorcycle
Satisfied Customers: 4,983
Experience: ............
Verified
Good day and welcome to Just Answer. My name is XXXXX XXXXX I'd be happy to help you with your problem today. That is quite easy. You will need to loosen the cable adjuster fully. Remove your derby cover from the outer primary to expose the center adjuster & locknut, loosen the lock nut, turn in the center adjuster until it is lightly seated, then back it out 1/2 turn, tighten the lock nut while holding the center adjuster, then return to the cable adjuster to set the proper cable free play at the lever @ 1/8". Let me know if you need more information.
....
...., ....
Category: Motorcycle
Satisfied Customers: 4,983
Experience: ............
Verified
.... and 87 other Motorcycle Specialists are ready to help you
Ask your own question now
Customer reply replied 8 years ago
Thank you very much for your help. Will
Thank you for using JA Will.
Ask Your Own Motorcycle Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a motorcycle mechanicLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask .... Your Own Question
....
....
...., ....
Category: Motorcycle
Satisfied Customers: 4,983
4,983 Satisfied Customers
Experience: ............

.... is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Jeff Policky

Jeff Policky

Motorcycle Mechanic

2,425 satisfied customers

Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP

Louie

Louie

Technician

1,451 satisfied customers

25+ yrs. experience

TIMOTO

TIMOTO

Motorcycle Mechanic

1,246 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,032 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

Kenny O.

Kenny O.

Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands

619 satisfied customers

Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

< Previous | Next >

Related Motorcycle Questions
89 softail will not shift into 3rd gear. When bike is not
89 softail will not shift into 3rd gear. When bike is not running the trans will go into all of the gears with no problem … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,222 satisfied customers
My 03 Yamaha raptor has hot cams and stage two valves i keep
my 03 Yamaha raptor has hot cams and stage two valves i keep going thru bearings and this time i broke a keyway for the flywheel i was wondering if this is a decompression issue and if so how can i fi… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
423 satisfied customers
I have a 07 twin cam Harley and the clutch took a dump. Now
I have a 07 twin cam Harley and the clutch took a dump. Now I can't find a replacement hub and basket, it is totally different then a 08 I found wich is supposed to be a direct replacement, starter ge… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
423 satisfied customers
Hi Steve, I have fitted a 2013 96A t/c into a softail frame
Hi Steve, I have fitted a 2013 96A t/c into a softail frame and I am using a Pegasus Fuel Injection system from PFI (Performance Fuel Injection) which has a Translator that wires up to the crank senso… read more
kwiggins29059
kwiggins29059
Associate Degree
219 satisfied customers
Hello Steve, My question is very similar to Lauras from
Hello Steve, My question is very similar to Laura's from 422 days ago. My wife rides a 2011 CVO Softail Conv and the clutch has recently started doing the same thing, except more severely. The clutch … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,222 satisfied customers
2004 88 softail standard. Over heated idling. shut off but
2004 88 softail standard. Over heated idling. shut off but not before pipes blued and oil started leaking from primay side. Motor sounds good and no smoke.. ran approx 10 min sitting before was shut o… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,222 satisfied customers
I am looking at 2 fatboys a 2002 w/1450 carburated 9000 miles
I am looking at 2 fatboys a 2002 w/1450 carburated 9000 miles very clean nice chrome and good shiny paint. Also a 2004 w/1450 injected 650 miles yes 650. 2 chips in paint on fenders clean good chrome … read more
Jeremy R
Jeremy R
1,069 satisfied customers
engine oil..drive train gearbox bung can you tell me..my engine
Hi there I have a HD softail duice 2000 model I recently changed the engine oil and filter but when I thought I undid the resivor tank bung I acidently undid the drive train gearbox bung can you tell … read more
Andre Pilon
Andre Pilon
Motorcycle Mechanic
Vocational, Technical or Trade Scho
1,032 satisfied customers
Just bought an 05 softail STD, from a HD dealer..efi
Please Help. Just bought an '05 Softail STD, from a HD dealer, and supposedly Stage 1, but with standard HD silencers that even my wife says is far too quiet. If I fit Screamin Eagle 11's will the EFI… read more
Motorcycle Tech
Motorcycle Tech
1,297 satisfied customers
slip..oil cooler..maybe a loose bearing Clutch/trany..neutral
I have a 2007 Softail Heritage,with 15,000 mlies. Stock other then Rush slip-on mufflers, K&N Filter in the stock breather,oil cooler,Nightriders. My question, I'm hearing a noise like maybe a loose b… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,222 satisfied customers
softail..other gears are harder to shift into also but after it warms
99 softail evo I'm having trouble shifting. Its a new 6 speed sometimes when I start in low I have to shift into 2nd with my hand the other gears are harder to shift into also but after it warms up an… read more
Brian D
Brian D
Genral Manager, shop foreman, dyno tuner
High School or GED
536 satisfied customers
oik eng light..nut..engine from oillline ???2000 heritage softail 1450
a piece of electrial tape fell into the oil tank and now blocking oil to engine...red oik eng light on...is their a screen that prevent obstructions from the bottom of oil tank to the lne to the engin… read more
....
....
....
Vocational, Technical or Trade Scho
4,983 satisfied customers
2004 Harley-Davidson Softail Fatboy FLSTF 1450- How many cylinders
2004 Harley-Davidson Softail Fatboy FLSTF 1450- How many cylinders does it have and how much does it weigh? Thanks… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,222 satisfied customers
Ultra wide Glide, 96 s&s engine, 1997. Clutch is slipping..harley
I have an Ultra wide Glide, 96" s&s engine, 1997. Clutch is slipping badly. Some say most parts are interchangeable with harley. Bike looks like a a softail. Should I get a harley softail shop manual … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,222 satisfied customers
What gas tanks will fit on a 2007 softail custom vin#..models
What gas tanks will fit on a 2007 softail custom vin#1HD1JL5107Y022255 Years and models that will work.… read more
GW DICKINSON
GW DICKINSON
Associate Degree
78 satisfied customers
2003 softail std harley davison I,m looking to replace my brake pads.
I have a 2003 softail std harley davison I,m looking to replace my brake pads. Any sugestions… read more
....
....
....
Vocational, Technical or Trade Scho
4,983 satisfied customers
harley-davidson is suppose to be the kind of engine is in the bike
the 7th digit on the serial number on a harley-davidson is suppose to be the kind of engine is in the bike. My question is this not always true and would like info on how to read a harley-davidson ser… read more
Motorcycle Tech
Motorcycle Tech
1,297 satisfied customers
I have a 2007 Harley Hertiage Softail, and I want to change the grips
I have a 2007 Harley Hertiage Softail, and I want to change the grips on it, but I do not know how to get them off, can you help me please?… read more
Bill
Bill
Harley Tech
High School or GED
146 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x