Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
I have a1990fxr I replaced oil pump gasket removed oil lines
I have a1990fxr I replaced oil pump gasket removed oil lines and oil line on the oil filter mount put back together now I don't have oil Pressure can you tell me if I have the lines on the oil filter … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
1990 tour glide. runs good then dies. starts bak up. good
1990 tour glide. runs good then dies. starts bak up. good for a few minutes then dies again. just went to gas station. when I came out and tried ti start it all I hear is clicking from under the seat.… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
I have a Harley FXRS. After starting engine; it backfired
I have a Harley FXRS. After starting engine; it backfired through the exhaust. Then after restarting; it had little to no horsepower. Has good compression on both cylinders. Both plugs are firing. Wil… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
I have a 92 HD fxrs and my fuel sender has a bad rheostat.
I have a 92 HD fxrs and my fuel sender has a bad rheostat. The sender is obsolete. Is it possible to buy and replace the rheostat portion of the sender? If so where can I buy it?… read more
P.J.
P.J.
595 satisfied customers
I have an 1990 FXR Evo motor. I have just replaced my tappet
I have an 1990 FXR Evo motor. I have just replaced my tappet guides and tappet blocks due to noise in engine. The noise is still there. It's only in the front cylinder, and now I'm told that it could … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
that is designed for fxr bike to fit my 2003 roadking..local dealer
How can I alter the frame for a 1991 TLE sidecar that is designed for FXR bike to fit my 2003 roadking. The local dealer is unable to provide any guidance in this matter.… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
to take apart an ingnition switch on a 1988 flhs, it is very diferent
do you know how to take apart an ingnition switch on a 1988 flhs, it is very diferent from any other model… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
It was the ignition module on the 2003 Sportster..running great
Hi Steve, It was the ignition module on the 2003 Sportster. It is running great now. Another thing I would like your opinion on. I'm looking to buy a larger size cruiser 1500cc and up. $12k to $15k ra… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
glide..it leaking oil from somewhere under the kick stand..gaskets
I have a 1998 wide glide. It's a nice scooter but I have a consistent problem with it leaking oil from somewhere under the kick stand. Had gaskets replaced twice but still have a slow dribble marking … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
1990 fxrs conv cranks but wont fire...started sputtering
1990 FXRS conv cranks but won't fire. Yesterday it started sputtering and backfireing alot. Any ideas?… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
Some difficulty finding a mounting kit that works with my ride
Hello, I recently bought a used HD sidecar that was attached to a shovelhead. The mounting hardware isn't designed for my 2005 FLSTSC obviously. I am having some difficulty finding a mounting kit that… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
i stripped my tranny shifting leaver..shaft..fixing
i stripped my tranny shifting leaver and the splins comeing out of the tranny are shot ,whats that shaft called and whats the best way to go about fixing it 5 speed trany… read more
Brian D
Brian D
Genral Manager, shop foreman, dyno tuner
High School or GED
536 satisfied customers
The crane cam box disconect, also need to get cam gear cover off
need to replace cam gear cover on 1989 FXR 1340 HD. How does the crane cam box disconect, also need to get cam gear cover off. Thanks, David Myers… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
7,281 satisfied customers
IT THE OIL PRESSURE DROPS AFTER FEW MINUTES OF RUNNING IS IT..OIL PUMP
I HAVE 1998 SUPERGLIDE PUT A FRESH 1985 FXR MOTOR ON IT THE OIL PRESSURE DROPS AFTER FEW MINUTES OF RUNNING IS IT BECAUSE OIL TANK IS LOWER THAN OIL PUMP ON DYNA FRAME I THINK THE OLDER EVOS USED GRAV… read more
Terry
Terry
Owner South Shore Cycle N.Y.
Vocational, Technical or Trade Scho
198 satisfied customers
how reliable are the 1983 harley davidson FXRS models and what
how reliable are the 1983 harley davidson FXRS models and what were thier most common problems Ijust bought one from a dealer he says they rebuilt the engine and has 5 miles on it ,the whole bike has … read more
....
....
....
Vocational, Technical or Trade Scho
4,983 satisfied customers
Bike..vent..the air cleaner but was routed down with a dump hose..carb
I installed new oil lines on my HD 88' FXR, I am pretty confident that I installed all the lines correctly. Now opon attempting to start the bike oil is "puked" out the crank case vent that used to go… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,384 satisfied customers
1987 Harley fxr spitting oil..Crank case..I replaced check valve
1987 Harley FXR spitting oil from the Crank case breathing tube, and I replaced check valve.… read more
Motorcycle Tech
Motorcycle Tech
1,297 satisfied customers
I have a 1989 FXR super glide with a 1340 motor crank ...
I have a 1989 FXR super glide with a 1340 motor crank vent filter that is leaking. I took it to the Harley shop to be fixed, but it is still leaking. When I bought it the bike it had sat unused for 1 … read more
Bill
Bill
Harley Tech
High School or GED
146 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Jeff Policky

Jeff Policky

Motorcycle Mechanic

2,425 satisfied customers

Yamaha Gold, Suzuki Gold, Honda Bronze, Polaris Bronze, BRP

Louie

Louie

Technician

1,451 satisfied customers

25+ yrs. experience

TIMOTO

TIMOTO

Motorcycle Mechanic

1,246 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,032 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

Kenny O.

Kenny O.

Motorcycle, ATV, Mules, Side by Side's Product Specialist. All Brands

619 satisfied customers

Worked for Kawasaki Motors as a Product Support Specialist (Factory Support) for 24 years

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x