Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
1987 softail have a starting issue.was running fine but a
1987 softail have a starting issue.was running fine but a friend told me he heard something wrong and started to fidget w it and it no longer will stard.it has a cam crane h i 4 ignition and i think t… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Bought a special constuction 09 sotail with a 1996 evo motor
bought a special constuction 09 sotail with a 1996 evo motor that was sitting for 8 years improperley but got it running and runs good for about 15 to 20 min then starts chattering loudrer than the dr… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Trying to find location of 2 stud circuit breaker 30amp.my
trying to find location of 2 stud circuit breaker 30amp.my stock one mounted to axis tube with a little clip. next to that was little fitting? not grease. 1/4'' hose connected-air v.o.e.s maybe,not su… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Trying to hook up 2019 fat Bob handle bar controls to a 1995
Trying to hook up 2019 fat Bob handle bar controls to a 1995 Softail. Is there a electronic board in the controls. … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
I have a 1996 fatboy, stock, I'm losing power at higher rpm
I have a 1996 fatboy, stock, I'm losing power at higher rpm after about 30 min of running. Coil is new carb is cleaned and good , tank and filter is good. Would it be my voes system, and does the voes… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
Wanted to see what the max riser height I can use on a 2017
Wanted to see what the max riser height I can use on a 2017 softail slim S without changing factory cable,wire, linens. … read more
JOHN aka Eauto
JOHN aka Eauto
self employed
High School or GED
23,500 satisfied customers
I have a 92 fatboy that I cannot get to idle. It sat for a
I have a 92 fatboy that I cannot get to idle. It sat for a couple of years with bad gas. I took the carburetor apart and cleaned it several times. It runs fine at road speed, but when trying to idle, … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
I'm trying to change a mechanical speedo over to a electric
I'm trying to change a mechanical speedo over to a electric I guess youd call it … read more
Keith Hurt
Keith Hurt
Service Manager
Certificate of Graduation
51 satisfied customers
1998, 80" evo, not sure how or which wirers go to coil. Its
1998 , 80" evo , not sure how or which wirers go to coil … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
89 softail will not shift into 3rd gear. When bike is not
89 softail will not shift into 3rd gear. When bike is not running the trans will go into all of the gears with no problem … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
What is the maxium cylinder head temperature a 103 engine
What is the maxium cylinder head temperature a 103 engine should have? Installed slip on mufflers and wonder if the engine could run too lean. Measured 227 F … read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
I am interested in purchasing a 1995 harley softail fxstc with
I am interested in purchasing a 1995 harley softail fxstc with about 30000. What common problems are with this bike and what major and minor maintenance should have been performed on the bike. Thanks … read more
Wayne-Mc
Wayne-Mc
Motorcycle Mechanic
Vocational, Technical or Trade Scho
293 satisfied customers
rode bike up the street...having to rev up the engine at take
rode bike up the street...having to rev up the engine at take off to get it to go...runs fair once I'm moving, but when I ease off the throttle, and give it some more throttle, it wants to jerk, and s… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
harley..acceleration..gears while crusing lite trottle it will stutter
i have a 1995 harley fatboy that started having problems with acceleration when in gear and pulling away it stutters while trying to accl. modulation whith trottle gets thru gears while crusing lite t… read more
Steve
Steve
I&C technician
Vocational, Technical or Trade Scho
8,057 satisfied customers
hd softail standard tailight harness and a fatboy harness
is there a diffrence between hd softail standard tailight harness and a fatboy harness at tailight hookup board… read more
Andre Pilon
Andre Pilon
Motorcycle Mechanic
Vocational, Technical or Trade Scho
1,055 satisfied customers
1995 sportster, that was used earlier as a drag bike...carb
I have a 1995 Sportster, that was used earlier as a drag bike. I have restored it to street use. It has been modified alot, it has a 42 mm macuni carb, which makes alot of noise. It has been given big… read more
....
....
....
Vocational, Technical or Trade Scho
4,983 satisfied customers
2000c: harley..module in the timing cone and run the wire harness
I am installing a Dyna 2000i ignition in my 1984 Harley Softail. I've installed the module in the timing cone and run the wire harness to the coils. The instructions now say to plug the purple wire (n… read more
....
....
....
Vocational, Technical or Trade Scho
4,983 satisfied customers
i have a 100inch rev tech engine. it has an S&S super e ...
i have a 100inch rev tech engine. it has an S&S super e carb it has a bad miss at idle and gets real bad in the mid range. carb is brand new and fuel doesnt seem to be the problem could the vacuum ele… read more
....
....
....
Vocational, Technical or Trade Scho
4,983 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,327 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x