Motorcycle

Motorcycle questions? Ask a mechanic.

Connect one-on-one with {0} who will answer your question

Related Motorcycle Questions
I have a KX500 I have owned for 20 years at sea level to
I have a KX500 I have owned for 20 years at sea level to california desert riding, always starts 2nd kick. I now live and ride from 4,400' to 8,400' it takes starting fluid and a dozen kicks when cold… read more
Martin B
Martin B
Head Honda & Kawasaki Technician
High School or GED
485 satisfied customers
Good dayRe: 1996 CR 500I had my motor rebuilt..crank..bike..idling
Good day Re: 1996 CR 500 I had my motor rebuilt, new barrel, new piston, new crank covers and mild porting done. I purchased a PWK 39 carb and I installed a RAD Valve, FMF racing Pipe and a Pro Design… read more
Jeff Policky
Jeff Policky
Motorcycle Technician
Yamaha,Suzuki,Polaris Technical Tra
2,425 satisfied customers
Wont idle..idle down..the manifold exhaust pipe glows red.bike
500 predator starts but runs almost wide open,won't idle down,at the manifold exhaust pipe glows red.bike was not run for six mon.choke cable seems ok.… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
Daytona: engine exhaust quickly overheats..muffler..carb
1983 flht shovel . Newly rebuilt engine exhaust quickly overheats to glowing pipes. (2into 1 single exhaust with unniversal 2.5'' muffler )with oringinal carb (165 main jet) and new ignition system (d… read more
Wayne-Mc
Wayne-Mc
Motorcycle Mechanic
Vocational, Technical or Trade Scho
293 satisfied customers
198 honda: bottom end i have put new crank,rod,piston,rings,stator
i ave a 198 honda cr500 that is bogen on the bottom end i have put new crank,rod,piston,rings,stator and have stator set on 3. and it is very hard to start when cold i was told it is out of time but i… read more
Ski Doctor
Ski Doctor
Owner, operator
Vocational, Technical or Trade Scho
530 satisfied customers
HONDA: THROTTLE..PISTON,JUG,REPLACED TWO INTAKE VALVES HAD HEAD WORK
I RECENTLY PURCHASED AN 06 CRF 250R HONDA,HAVENT RODE IT FIFTEEN MINUTES IT WONT IDLE,IF YOU LET OFF THE THROTTLE IT KEEPS ON GOING,REPLACED PISTON,JUG,REPLACED TWO INTAKE VALVES HAD HEAD WORK DONE PU… read more
Eric
Eric
technician
Vocational, Technical or Trade Scho
1,584 satisfied customers
limited: slip..kit..pipe..gas to stand it up it acts like it chokes
i have the directions for the slip-on telling me to jet it this way and the directions for the jet kit saying another. i dont have the head pipe for a complete sytem. i live in town so i am limited to… read more
cjstem
cjstem
Lead Tech for independent shop
High School or GED
78 satisfied customers
2004 Suzuki: acceleration..runs fine..bike will stall if throttle
I have a 2004 Suzuki Rmz250. Engine bogs on quick acceleration and pops. Once through low range bike runs fine, bike will stall if throttle is turned extremely quick at idle. Engine has new Weisco hig… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
1992 honda: the top end and replaced the crank seals..bike..rev
i have a 1992 honda cr125, i have done the top end and replaced the crank seals. the jug was resleeved. not plated, the bike in first gear buggs baddly but if you rev the hell out of it it will rip yo… read more
Jonathan Spiegel
Jonathan Spiegel
Bachelor's Degree
14 satisfied customers
rebuilt my..my 1996..fuel compression and spark and still doesnt work
i just rebuilt my 1996 kx 125 and i cant get it to start it has fuel compression and spark and still doesnt work what do i do?… read more
RSRBOB
RSRBOB
MC / Pwc Shop Owner
Vocational, Technical or Trade Scho
775 satisfied customers
rev..swapped..gaskets and carb intake boot no change in rpms
i have a 2003 kx 100, engine starts easily will rev fine sitting still but when i ride it engine starts missing and breaking down at above half throttle, has new crankseals, took all ignition parts fr… read more
Jeff Policky
Jeff Policky
Motorcycle Technician
Yamaha,Suzuki,Polaris Technical Tra
2,425 satisfied customers
pipe..core..i bought new jets and needle valve per fmf suggetions.
i have a 2001 kdx 200. i put a fmf narly woods pipe with a turbine core 2 spark arrester. i bought new jets and needle valve per fmf suggetions. i rode the bike first and it seems fine, should i still… read more
mrfixitRick
mrfixitRick
Self-Employed Mechanic
2 yrs University Mech Eng
98 satisfied customers
top end..moved the clip up and down on the needle..air screw
i have a 2003 cr125 new top end that boggs really bad off the start.ive moved the clip up and down on the needle and it makes no difference in the bogg.also the air screw is only about 3/4 of a turn f… read more
Ski Doctor
Ski Doctor
Owner, operator
Vocational, Technical or Trade Scho
530 satisfied customers
Rebuilt..top end..the choke on at hi RPMs and will not idle
I rebuilt the top end of my KX250, it now runs only with the choke on at hi RPM's and will not idle. Carburator problem?… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
A KX 250 F Dirt bike and I changed the exhaust..manifold..easy way
I have a KX 250 F Dirt bike and I changed the exhaust from the stock to an FMF Q4 and now the manifold is turning red when it is running. Is there an easy way to richen the mix?… read more
Wayne S.
Wayne S.
Motorcycle Mechanic
Fully Licensed Motorcycle Mechanic
1,435 satisfied customers
need to replace the jets on my 2006 rmz 250 four stroke. need
need to replace the jets on my 2006 rmz 250 four stroke. need to know how and how to set them.… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
my 2006 rm 250 is almost brand new..gears..runs great..going down
my 2006 rm 250 is almost brand new and runs very choppy and rough in the midrange in all gears. runs great pinned but is very rough otherwise. I have rejetted by going down 2 sizes on the main and one… read more
.......
.......
Vocational, Technical or Trade Scho
211 satisfied customers
ran fine..end of the day engin started rattling..smoke is coming..pipe
i just purchased a kx 250 ran fine all day, at the end of the day engin started rattling. some smoke is coming from the head where the pipe is connected, looks like it is a little loose, and a little … read more
Glenn Adams II
Glenn Adams II
Motorcycle/ATV Technician
Vocational, Technical or Trade Scho
393 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

TIMOTO

TIMOTO

Motorcycle Mechanic

1,327 satisfied customers

Honda registered technician, silver level award, former Kawasaki/Suzuki tech, 40+ years exp.

Andre Pilon

Andre Pilon

Motorcycle Mechanic

1,055 satisfied customers

Over 25 years experience, ICS, MMI, Owned shop for 12 years, worked tech-support for Harley Davidson

asphaltcycles

asphaltcycles

Motorcycle Mechanic

468 satisfied customers

I operate a motorcycle dealership and CCS Ducati Race team.

kwiggins29059

kwiggins29059

Motorcycle Mechanic

407 satisfied customers

Experience in Harley Davidson and Triumph

Glenn Adams II

Glenn Adams II

Motorcycle/ATV Technician

393 satisfied customers

6 years Motorcycle/ATV/Water Craft; 4 years auto; 18 years carpenter

Wayne-Mc

Wayne-Mc

Motorcycle Mechanic

293 satisfied customers

31 Years experience with Harley-Davidson motorcycles, licensed Motorcycle Mechanic, Shop Owner

Terry

Terry

Motorcycle Mechanic

198 satisfied customers

Over 20 years experiance multi-line tech specializing in H-D. troubleshooting and advanced fuel injection

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x