Mitsubishi
Mitsubishi repair problems? Ask a mechanic for answers ASAP
Connect one-on-one with {0} who will answer your question
Answered in 3 minutes by:
8/30/2019
AutoDoc1, ASE Master Certified Technician
Category: Mitsubishi
Satisfied Customers: 2,480
Experience: ASE Master Certified Technician
VerifiedHello and thank you for using JustAnswer. My name is ***** ***** I will be able to assist you. During this conversation you will be given an automated offer for a phone call. You may accept or decline that offer.
I’m sorry that you’re having trouble with your vehicle. Don’t worry though, we’ll be able to figure this out. Please understand that I do not know your knowledge or capabilities so I may need to ask questions to find out basic information to completely understand your specific problem.
My goal is to give you the best service possible and to help you. If you have any questions or concerns, please don’t hesitate to let me know. Sometimes it may take a moment for me to respond because I may have to look up information about your concern. I appreciate your patience and will provide responses as soon as possible.
Did you purchase the parts from Mitsubishi or are they aftermarket?
Customer replied 1 month ago
but the old one didnt have this seal on it when I took it off
Ok, you will not use the seal around the thermostat. You will only use the separate gasket. It should look like #3 in this picture.
How JustAnswer works
Describe your issueThe assistant will guide you
Chat 1:1 with a mitsubishi mechanicLicensed Experts are available 24/7
100% satisfaction guaranteeGet all the answers you need
Related Mitsubishi Questions
Coolant leaking from behind water pump housing whare it
Second opinion] Coolant leaking from behind water pump housing whare it meets the block and then tracking through the valley and coming down over the transmission… read more
Joe Prestia
Automotive Repair Specialist
1,078 satisfied customers
2003 eclipse starts hard stalls instantly. Stalls as soon as
2003 eclipse starts hard stalls instantly JA: Is the check engine light on? Does the Mitsubishi stall at idle or when driving? Customer: Stalls as soon as it starts JA: Are you fixing your Eclipse you… read more
sara cole
associates
108 satisfied customers
I have a 2007 Mitsubishi eclipse 2.4 and other day was at gas
I have a 2007 Mitsubishi eclipse 2.4 and other day was at gas station put gas in went inside store and when I came out car wasn't running , tried to start back up and it turned over normal for about 2… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Eclipse rs: Weve replaced the timing belt in my
We've replaced the timing belt in my 1999 mitsubishi eclipse, RS and now can't get the timing right. We've lined up all the marks multiple times and still can't get it to run right. Any ideas?… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Eclipse GST: I installed a manual boost controller
I installed a manual boost controller to my 1999 mitsubishi eclipse gst . Now I have a code 1104 and I need to pass inspection .what should I do to take that engine light turned off to pass inspection… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Eclipse GSX: I recently went to drive my 1999 Mitsubishi
I recently went to drive my 1999 Mitsubishi eclipse GSX. Got into the car and the clutch dropped to the floor. The only way the get the pedal up is to pull it up. What could be the issue with the car?… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Eclipse Spyder GS: 1999 mitsubishi eclipse spyder
1999 mitsubishi eclipse spyder keeps setting code p0340 Changed cam sensor still have intermittent stall after 20sec or so. and then sometimes it just starts and runs, what could cause this?… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2002 eclipse: dtc..harness from sensor to pcm.harness checks..volt
2002 eclipse 2.4 dtc 340 cam circut.allready replaced cam sensor.code resets.ohmed the harness from sensor to pcm.harness checks good.b+ 5 volt refference,and ground ok.do you have any sugestions.… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2002 mitsubishi galant: 3.0 ,but my mechanic says..wont work
i have a 2002 mitsubishi galant with a bad transmition,i found a transmition from a mitsubishi eclipse 2001,they are both 3.0 ,but my mechanic says that the transmition from the eclipse wont work on m… read more
Mike Kelly
Mitsubishi Mechanic
Vocational, Technical or Trade Scho
104 satisfied customers
1999 MITSUBISHI Eclipse: I keep reading about (6) six and (7) bolts
I have a 1999 MITSUBISHI Eclipse that I am trying to purchase a CYLINDER HEAD from the ebay vendors. I keep reading about (6) six and (7) bolts Cylinder Head,s what are they talking about?. What are 6… read more
Jake
5,106 satisfied customers
97 mitsubishi eclipse: non turbo..car came..wouldnt..jumped
Hey Guys Im so needing help feel like driving this car off a cliff. Im working on a 97 mitsubishi eclipse 2.0 non turbo. The car came in dead and wouldnt shift after being jumped started. We replaced … read more
Greg
Shop owner, technician
Vocational, Technical or Trade Scho
6,393 satisfied customers
1999 Mitsubishi Eclipse: with a 2.0 4 cyl..with 200k miles.
I have a 1999 Mitsubishi Eclipse with a 2.0 4 cyl. with 200K miles. I have never had any problems with the car. The temperature has always run about midways. Now, after about 30 minutes of running at … read more
Jake
5,106 satisfied customers
1999 mitsubishi eclipse: already replaced the map sensor..trouble code
I have already replaced the map sensor on the 1999 mitsubishi eclipse but it keeps triggering a trouble code P1400 why ?… read more
BigBob
Service Manager
High School or GED
4,792 satisfied customers
1994 Mitsubishi eclipse: 1.8L..crankshaft pulley bolt..seal
i am working on a 1994 Mitsubishi eclipse 1.8L and need to remove the crankshaft pulley bolt to replace the crankshaft seal behind it how do i remove it… read more
SuperDave
auto technician
101 college hrs
1,481 satisfied customers
1999 mitsubishi eclipse spyder gs: I adjust the tension..belts..2.4l
How do I adjust the tension on the drive belts for a 1999 mitsubishi eclipse spyder gs 2.4l… read more
BigBob
Service Manager
High School or GED
4,792 satisfied customers
1999 Mitsubishi Eclipse GS: rev..fuel filter..spark plugs..alternator
1999 Mitsubishi Eclipse GS 2.0 MT This car just quit while driving check engine and battery light came on right before this occurred. Car will start and idle if you dont give it any acceleration or re… read more
Amedee
Automotive Consultant
Vocational, Technical or Trade Scho
20,945 satisfied customers
Mitsubishi galant: Crankshaft Pulley..a Mitsubishi Eclipse 1999 2.4L
Hi, I want to ask you if the Crankshaft Pulley from a Mitsubishi Eclipse 1999 2.4L will fit on a Mitsubishi galant 1999 2.4L Tank you, waiting for your answer… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
1998 mitsubishi eclipse GS: a dodge neon..DOHC..automatic..year model
can i put a dodge neon 2.0 DOHC automatic motor into a 1998 mitsubishi eclipse GS? if so then what year model do i need for the dodge neon? also what changes would need to be done so it would work?… read more
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
JustAnswer in the News:
Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.
What Customers are Saying:
I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.
Elm City, NC
used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.
Richmond, TX
9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.
Marysville, CA
Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.
Walnut Creek, CA
As a single woman, I really appreciate an excellent and affordable opinion.
Charleston, WV
Thank you Geordie, I will not hesitate to contact justanswer in the future!
Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.
Castleberry, FL
Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.
Freshfield, Liverpool, UK
< Previous | Next >
Meet the Experts:
Doug
ASE Certified Technician
7,006 satisfied customers
Mitsubishi employed and Factory trained ASE certified technician
George H.
ASE Certified Technician
321 satisfied customers
ASE Master tech 15+ years
Chris (aka- Moose)
Technician
309 satisfied customers
16 years of experience
Tim Mohr
ase master
222 satisfied customers
30 yrs foriegn and domestic, gas and diesel
Mike Kelly
Mitsubishi Mechanic
104 satisfied customers
17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.
Don - Mo Lurch
Mitsubishi Mechanic
52 satisfied customers
16 years, Line Mechanic, Electronics trouble shooting, etc
AMD
Master Technician
48 satisfied customers
L1 Advanced Level Diagnostics Specialist
< Previous | Next >
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.
