Mitsubishi

Mitsubishi repair problems? Ask a mechanic for answers ASAP

Ask an Expert,
Get an Answer ASAP!

What is the injector hold down bolts on a Mitsubishi 4m50…

Customer Question
What is the injector hold...
What is the injector hold down bolts on a Mitsubishi 4m50 engine
Submitted: 17 days ago.Category: Mitsubishi
Show More
Show Less
Ask Your Own Mitsubishi Question
Answered in 1 day by:
4/4/2018
Mitsubishi Mechanic: eric remington,
 replied 16 days ago
eric remington
Category: Mitsubishi
Satisfied Customers: 471
Experience: mechanic/service advisor at topline auto
Verified
hello Eric hear from justanswer to help you I wanted to know if the bolts that you're using did you need to torque specifications or did you need the size of bolt that you need not sure I understood the question thank you
Ask Your Own Mitsubishi Question
Customer reply replied 16 days ago
Sorry, I need the injector hold down torque spec. And method if there's a special way torque them down. Every time I install new orings I torque then to 6ft lbs and the orings blow out and oil rushes out of the injector holes
Mitsubishi Mechanic: eric remington,
 replied 16 days ago

u​se a little vasoline on orings and make sure you are going in straight. get me vin number and I will look that up for you

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 16 days ago

or wheel bearing grease

Ask Your Own Mitsubishi Question
Customer reply replied 16 days ago
I use grease every time I install the orings. Do you want engine number or truck Vin?
Mitsubishi Mechanic: eric remington,
 replied 16 days ago

truck .... does oring seat in the hole or are orings too big? this is odd

Ask Your Own Mitsubishi Question
Customer reply replied 15 days ago
Jl6bbg1s67k015488
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

so​unds like wrong size orings...do you have some of the old ones...get a magnifying glass and look closely....this is a first. if you don't have orings call dealer and get from dealer...Are you a professional repair shop?

Ask Your Own Mitsubishi Question
Customer reply replied 15 days ago
I'm a professional repair shop but I mostly work on American engines. This is the first time I've ever worked on a Mitsubishi engine and everything seems to be different I had to do a head gasket and I've bought all orings from the dealer so I could make sure there right but I don't think I'm torquing them down right or to the right spec
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

so everyone breaks? ok I will ook up torque specs....can you push the oring in hole with a corresponding size socket? it should slide down in the hole...lol

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

f​or whatever reason that number you provided didn't work...that can be if its not a US model or the number is ***** also can you give me year make model engine size...I got JL6BBG1s67k015488....I'm going to switch the o with a zero and try that also you can take a pic and I can put in manually as it is I can put in altogether and that's what I did

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

y​eah I switched the L with one and the o with zero etc. so double check on that please

Ask Your Own Mitsubishi Question
Customer reply replied 15 days ago
the engine info is
Model 4m50-3at8
Family 6mfth04.9m5a
Displacement 4.889L
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

DIESEL?

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

truck info sometimes a little harder to find

Ask Your Own Mitsubishi Question
Customer reply replied 15 days ago
Mitsubishi fuso box truck 4cyl diesel
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

let me see if I can find it by application

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

oops sorry wrong one

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

hold on

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

see if any info here

Ask Your Own Mitsubishi Question
Customer reply replied 15 days ago
Only stuff there is head gasket info for cars
Customer reply replied 15 days ago
I need injector hold down spec for medium duty diesel
Mitsubishi Mechanic: eric remington,
 replied 15 days ago

k​ sorry...I will keep looking

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

35 FT LBS https://www.manualslib.com/manual/1060850/Mitsubishi-S3l.html?page=156#manual

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

If you are satisfied with your answer, please take a moment to rate my service before you go. Experts are not compensated without a positive rating. Providing a rating does not close the question, you can reply or ask additional questions without incurring further charges. Rating my answer positive charges your account the full question value and credits me. Submitting for a refund removes the credit from my account and makes me donate my time and experience for free, which is not my intention. Please only rate positive if you are satisfied and intend on paying for the services you agreed to. Thanks!

if for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT/3 STARS OR HIGHER today. Please reply and let me know why, so I can help more/better. All follow up responses are FREE, after completing the required rating
Please remember to rate service using the separate rating page. Thank you

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

stupid question,,, you are lubricating orings correct? sorry have to ask

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

an​y help from that website?

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

here you are https://www.manualslib.com/manual/1060850/Mitsubishi-S3l.html?page=158#manual

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

If information is correct please rate me if I can assist in search from here let me know

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 14 days ago

f you are satisfied with your answer, please take a moment to rate my service before you go. Experts are not compensated without a positive rating. Providing a rating does not close the question, you can reply or ask additional questions without incurring further charges. Rating my answer positive charges your account the full question value and credits me. Submitting for a refund removes the credit from my account and makes me donate my time and experience for free, which is not my intention. Please only rate positive if you are satisfied and intend on paying for the services you agreed to. Thanks!

if for any reason, you can't rate my answer OKAY, GOOD, or EXCELLENT/3 STARS OR HIGHER today. Please reply and let me know why, so I can help more/better. All follow up responses are FREE, after completing the required rating
Please remember to rate service using the separate rating page. Thank you

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 12 days ago

Hello do you need assistance either with further questions and or rating?

Ask Your Own Mitsubishi Question
Customer reply replied 12 days ago
I will be back at my shop monday morning and I will see if everything I have gathered works
Mitsubishi Mechanic: eric remington,
 replied 12 days ago

k

Ask Your Own Mitsubishi Question
Mitsubishi Mechanic: eric remington,
 replied 10 days ago

D​id I answer all of your questions do you have any more?

Ask Your Own Mitsubishi Question
Was this answer helpful?
Ask eric remington Your Own Question
eric remington
eric remington
eric remington
Category: Mitsubishi
Satisfied Customers: 471
471 Satisfied Customers
Experience: mechanic/service advisor at topline auto

eric remington is online now

A new question is answered every 9 seconds

How JustAnswer works:

  • Ask an ExpertExperts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional AnswerVia email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction GuaranteeRate the answer you receive.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Doug

Doug

ASE Certified Technician

6,974 satisfied customers

Mitsubishi employed and Factory trained ASE certified technician

George H.

George H.

ASE Certified Technician

312 satisfied customers

ASE Master tech 15+ years

Tim Mohr

Tim Mohr

ase master

205 satisfied customers

30 yrs foriegn and domestic, gas and diesel

Jake

Jake

Automotive Technician

195 satisfied customers

Experienced collision repair technician, Pulaski Tech graduate and DSM hobbyist.

Chris (aka- Moose)

Chris (aka- Moose)

Technician

160 satisfied customers

16 years of experience

Mike Kelly

Mike Kelly

Mitsubishi Mechanic

104 satisfied customers

17 years experience as an auto mechanic, foreign and domestic. 5 years running my own repair business.

AMD

AMD

Master Technician

48 satisfied customers

L1 Advanced Level Diagnostics Specialist

< Previous | Next >

Related Mitsubishi Questions
I have 99 eclipse gs and it is completely gutless it has no
Hey so I have 99 eclipse gs and it is completely gutless it has no power all the way up the gears and it has been like this ever since I bought the car used. It currently has no exhaust past the flex … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
160 satisfied customers
New timing belt have spark and compression no start. New
new timing belt have spark and compression no start … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
5,033 satisfied customers
My 2007 Mitsu spyder won't drop top The sensors keep beeping
My 2007 Mitsu spyder won't drop top The sensors keep beeping as if the top is open, but the top is closed We're pretty sure it's an electrical wiring issue, since the sensors are intact We don't know … read more
Jake
Jake
Automotive Technician
Vocational, Technical or Trade Scho
195 satisfied customers
Just bought 2002 montero for my daughter this week and can't
just bought 2002 montero for my daughter this week and can't get back door to open. any ideas for a fix? … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
160 satisfied customers
I own a 2000 challenger and which will not start when I turn
I own a 2000 challenger and which will not start when I turn the key but the starter kicks. I have ascertained that the problem is not the control unit but I suspect the control unit relay. … read more
Chad Farhat
Chad Farhat
Owner
Associate Degree
5,023 satisfied customers
My Endeavor rear window & door will not open. I replaced
My Endeavor rear window & door will not open. I replaced both the window and the door release handles, but they still won't open. When I try to open them, all I hear is a clicking noise like they're t… read more
Pete
Pete
Independent Auto Technician
Vocational, Technical or Trade Scho
138 satisfied customers
I have a 09 Galant that needs a radiator but I can't find
I have a 09 Galant that needs a radiator but I can't find one with this special sensor in it unless I go to the dealer and they are over $1000.00. Do you have any suggestions? … read more
Eric
Eric
Retired
N/A
14,436 satisfied customers
All passenger windows wont go down. 2000 Mitsubishi
I have no taillights replaced my headlight switch to see if the taillights would work, didn't make them work, changed the relay for the taillights, didn't work, works with a jumper from one live one not, no high beam on headlights, passenger windows wont go down and my blower motor wont shut off and only blows little air. are they connected in any way that my car is turning into an electrical nightmare… read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
160 satisfied customers
I have a 4g63 block and g6k head this ok? 1999. Im
i have a 4g63 block and g6k head this ok? JA: What is the model/year of your Mitsubishi? Customer: 1999 JA: Are you fixing your vehicle yourself? What have you tried so far? Customer: im rebuilding JA… read more
Cesar Jimenez
Cesar Jimenez
Owner/CEO
Vocational, Technical or Trade School
156 satisfied customers
Too many issues. I recently bought a Montero Limited 2004
Hello. Too many issues. I recently bought a Montero Limited 2004 with 98000 miles. After few miles I got service light with codes p0431 and p0134 and right after also p0171. Also, the tyre pressure li… read more
David Craig
David Craig
OWNER/MECHANIC
Associates
5,033 satisfied customers
2002 Mitsubishi Montero sport 3.0. Trying to take the
2002 Mitsubishi Montero sport 3.0. Trying to take the cylinder heads off. Except I can't figure out how to take the water passage assembly off on the backside of the heads. Any advise on getting to th… read more
Cesar Jimenez
Cesar Jimenez
Owner/CEO
Vocational, Technical or Trade School
156 satisfied customers
Can't get the rotors off the front. Idk how old but very
Idk how old but very rusted and grooved miles are 234000 … read more
David Craig
David Craig
OWNER/MECHANIC
Associates
5,033 satisfied customers
I just bought a 2008 Endeavour and the rear brake lights
I just bought a 2008 Endeavour and the rear brake lights don't work. The linear brake light above the rear window does work, however. could this be a fuse. Unfortunately, the car did not come with a o… read more
Dan
Dan
Automotive Technician
Vocational, Technical or Trade Scho
158 satisfied customers
I am looking to get a all of the programming codes for my
Hello i am looking to get a all of the programming codes for my 2007 mitshubishi outlander . Trying to prgram my tpms and my key vin : JA4MT41XX7U007904… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
6,974 satisfied customers
I just bought a year 2000 Mitsubishi Pinin 1.8 GDI, 3 doors,
I just bought a year 2000 Mitsubishi Pinin 1.8 GDI, 3 doors, left hand drive. The car has a AC (Climate Control, Air Conditioning). The dial knob for the cabin fresh air blower (on the heater/AC contr… read more
indy-tech
indy-tech
Shop owner, technician
Vocational, Technical or Trade Scho
11 satisfied customers
I have 2006 mitsubishi galant. Cranks no start. I have a
I have 2006 mitsubishi galant. Cranks no start. I have a matching ecu and immobilizer. How or where can I get them reprogrammed? … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
160 satisfied customers
2001 Montero Sport. My mechanic has not been able to resolve
My mechanic has not been able to resolve a/c problem. A/C does not chill. He serviced the system but still the compressor does not kick in. He has traced all wiring but still not working. … read more
Chris (aka- Moose)
Chris (aka- Moose)
Technician
Vocational, Technical or Trade School
160 satisfied customers
Just got a 2017 eclipse 2 weeks ago. this morning it
just got a 2017 eclipse 2 weeks ago. this morning it wouldn't start, no lights and is making a funny noise coming out of the driver's door... … read more
Jake
Jake
Automotive Technician
Vocational, Technical or Trade Scho
195 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x