How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6967
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

2007 mitsubishi eclipse cranks but won't fire, Pulled a plug

Customer Question

2007 mitsubishi eclipse cranks but won't fire
JA: Have you checked the fuel supply? And are all the spark plugs working?
Customer: Pulled a plug out and it's getting no spark
JA: Are you fixing your Eclipse yourself? What have you tried so far?
Customer: Trying to it was running fine shut it off and getting no spark
JA: Anything else you want the mechanic to know before I connect you?
Customer: Getting fuel but no spark
Submitted: 1 month ago.
Category: Mitsubishi
Expert:  david craig replied 1 month ago.

Hi Im David, thanks for visiting the site. when you pulled the plug was it wet?

Customer: replied 1 month ago.
No
Expert:  david craig replied 1 month ago.

so you arent sure youre getting fuel. do you get rpms when cranking?

Customer: replied 1 month ago.
No rpms when cranking
Expert:  david craig replied 1 month ago.

ok. do you have a volt meter

Customer: replied 1 month ago.
No just a few tools where I'm broke down but I'm getting no spark at all
Expert:  david craig replied 1 month ago.

ok, no rpms=crankshaft sensor or wiring to it

Expert:  david craig replied 1 month ago.

what size engine?

Customer: replied 1 month ago.
2.4
Expert:  david craig replied 1 month ago.

thank you

Expert:  david craig replied 1 month ago.

check fuse 9 in this box under the hood

Customer: replied 1 month ago.
All fuses are good
Expert:  david craig replied 1 month ago.

I understand you are on the side of the road and dont have a meter, but you need to access the crankshaft position sensor connector and check for power ground and signal when you get the car to wherever its going to

Customer: replied 1 month ago.
Ok thanks
Expert:  david craig replied 1 month ago.

please keep me updated. thanks

Expert:  david craig replied 1 month ago.

hows it going?