How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Technician
Category: Mitsubishi
Satisfied Customers: 7088
Experience:  17 years shop owner, 27 year Import technician
29331485
Type Your Mitsubishi Question Here...
Greg is online now
A new question is answered every 9 seconds

Stalling when accerating....failed to start

Customer Question

Stalling when accerating....failed to start today...(.replaced starter 2 seems ago)...replaced plugs and wires. #4 plug well had oil in it...got it started...still stalling at acceration
JA: Is the check engine light on? Does the car stall at idle or when driving?
Customer: No engine light
JA: What is the model/year of your Mitsubishi?
Customer: Idles ok...stalls when you accelerate while driving.......
JA: What year is your Mitsubishi?
Customer: 2001 galant 2.4
JA: Are you fixing your Galant yourself? What have you tried so far?
Customer: Yes...did what I said above
JA: Anything else you want the mechanic to know before I connect you?
Customer: Don't think so
Submitted: 10 months ago.
Category: Mitsubishi
Expert:  Greg replied 10 months ago.

Hi, I'm Greg (Indy-Tech).
Welcome to JustAnswer. I'm reviewing your question now, and will post back with your reply ASAP.
Rgds Greg.

Expert:  Greg replied 10 months ago.

Hi .

No check engine light ON when the engine is running .

When we see this problem with no check engine light and no malfunction codes we go ahead and remove the throttle body and give it a good clean out with throttle body cleaner spray .

making sure the Idle control valve has been removed and also cleaned .

ones cleaned replace and test .before doing this job disconnect the battery .

Still same problem then you will need a good scan tool to check the live data stream for any high or low readings like the MAF,fuel trims etc

Please go ahead and clean the throttle body and Idle control valve .then get back to me if needed.

Need further assistance with this issue then please get back to me with the reply box below .
After rating there is no further cost for any other question relating this issue .
Kind regards Greg