How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6967
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

I changed the battery after that 4wd stated flashing my car

Customer Question

i changed the battery after that 4wd stated flashing my car motero 2008
JA: Have you changed a battery before?
Customer: yes
JA: What is the model of your '08 Mitsubishi?
Customer: yes mitsubishi nativa
JA: Are you fixing your Nativa yourself? What have you tried so far?
Customer: yes my self
JA: Anything else you want the mechanic to know before I connect you?
Customer: no tks
Submitted: 1 year ago.
Category: Mitsubishi
Expert:  Chad Farhat replied 1 year ago.

Hi, I'm Chad. Welcome to JustAnswer. I'm reviewing your question and I will be posting your reply ASAP.

Expert:  Chad Farhat replied 1 year ago.

hey how are you

you will need a factory scanner or equivalent to run a diagnostic scan & retrieve fault codes from the transfer case module

have you driven on it since battery disconnection and for how long

is ABS light on ,check engine light on ,or only 4wd flashing ?

can you still shifted into 4wd ?

have checked all fuses?

Please let me know

Thank You

Chad Farhat

ASE Certified Technician

Customer: replied 1 year ago.
car drive for 10 days normal but 4wd light nd abs on
Expert:  Chad Farhat replied 1 year ago.
there so many things could be wrong , i can give you exact answer with out a scan on it you will need a factory scanner or equivalent to run a diagnostic scan & retrieve fault codes from the transfer case modulei m not sure abs causing it or 4wd , so i can narrow down the abs module & the abs module connector must be inspectedget some electrical contact cleaner & unplug spray in case you are making a poor contact and disconnect battery for 15 minutes and test drive especial since it is intermittent , also inspect all ground wires from frame to block take out abs wheel sensor and clean that is what i would do if no scanner is available that can read the necessary module Please let me know Thank YouChad FarhatASE Certified Technician