Mitsubishi Repair Problems? Ask a Mechanic for Answers ASAP
hello , I can help you with this .
you have checked the A/C refrigerant I understand ?
are you able to perform some basic checks if I instruct you ?
okay if you turn the A/C on with the engine running can you see that the A/C compressor clutch is " engaged "
does the large A/C pipe at the firewall get cold when you run the engine with the A/C 'ON " ?
you need to check these things first , okay ?
then you have a "system " problem . The Large pipe MUST get Cold and will actually "sweat " ( cold water/moisture ) There are service ports for checking the A/C system . You need to connect a gauge set and see that with the A/C " ON " and the engine running that you have apprximately 15 - 20 PSI on the Blue gauge ( Low side ) and 150 - 225 PSI on the Red gauge ( High Side ) . You need to confirm this before you can go further in diagnosing the A/C problem .
okay check further please . and let me know . I would like to ask that you leave me a positive feedback , 5 star rating from my assistance as it helps me greatly with Justanswer . Thanks so much and have a great day , Kevin . :-)
I would appreciate it if you could leave me feedback so I may get credited for my assistance to you . Thanks
hello ? I would like it if you can leave feedback so I my get credit for assisting you with your issue . Thanks . Kevin .
okay . could you please leave me a positive feedback rating so I may get credited with assisting you . As I initially asked you if the A/C compressor was " engaged " and you said that it was which was not the case then . Thanks for using just answer . do you require further assistance ?