How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 35490
Experience:  35 years in the AUtomotive repair Business
Type Your Mitsubishi Question Here...
Ron is online now
A new question is answered every 9 seconds

I have replaced the crankshaft sensor and the camshaft

Customer Question

I have replaced the crankshaft sensor and the camshaft sensor and ignition module and two coil packs and it still not starting
JA: Does the vehicle stall at low speeds? Does it sputter?
Customer: It won't start at all it quit on my wife no running bad just stopped
JA: What is the model/year of your Mitsubishi?
Customer: 2002 montero sport with a 3.0
JA: Are you hoping to fix this yourself? What have you tried so far?
Customer: Everything I know cam sensor crankshaft sensor and ignition module also two coil packs also the fuel pump
JA: Anything else you think the mechanic should know?
Customer: No
Submitted: 12 months ago.
Category: Mitsubishi
Expert:  Ron replied 12 months ago.

Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here. In order for the engine to start and run you need good spark to the spark plugs, injector pulse at the injectors, proper fuel pressure and good compression. If you can go in and check each one of these things foe me and post back with which one you are lacking I will work with you to determine the cause. Post back when you can and we can work from there.