How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg, Technician
Category: Mitsubishi
Satisfied Customers: 7063
Experience:  17 years shop owner, 27 year Import technician
Type Your Mitsubishi Question Here...
Greg is online now
A new question is answered every 9 seconds

Mitsubishi Montero Sport: , how can i program the alarm device

Customer Question

hi, how can i program the alarm device to my montero?
Submitted: 1 year ago.
Category: Mitsubishi
Expert:  Greg replied 1 year ago.
Hi and good morning . What problem are you having , alarm is activated and will not start . Rgds Greg
Customer: replied 1 year ago.
I need to program the keyless remote entry
Expert:  Greg replied 1 year ago.
Ok this is easy you can do this yourself . Here is what you do . 1 All you need a a paper clip or a suitable jumper wire and your remote with a new battery . 2. Insert keys in ignition and leave in the OFF position. 3. Make sure there are metal contact pins in terminals 1 and 4 and connect the Data Port terminals 1 and 4 with a suitable jumper wire,( Paper clip) leave the jumper wire connected throughout the programming procedure. Make sure you know which terminals are 1 and 4. 4. Within 10 seconds after connecting the jumper wire, press the Hazard Switch 6 times. Note: The doors will automatically lock and unlock once at this time indicating that the system is in the programming mode. 5. Press the LOCK button on the remote to be registered three times within 10 seconds. Upon successful programming, the door will lock and unlock once. 6. Repeat step 5 with up to 4 remotes (including any existing remotes) within one minute. After completing each programming, the doors will lock and unlock once. 7. Disconnect the programming wire and remove the keys from the ignition.

Related Mitsubishi Questions