How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8594
Experience:  Mitsubishi employed and Factory trained ASE certified technician
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

03 galant 2.4 no current to red wire on injectors, If I put

Customer Question

03 galant 2.4 no current to red wire on injectors
JA: Thanks. Can you give me any more details about your issue?
Customer: If I put 12 volts the car will start
JA: OK got it. Last thing — Mitsubishi Mechanics generally expect a deposit of about $18 to help with your type of question (you only pay if satisfied). Now I'm going to take you to a page to place a secure deposit with JustAnswer. Don't worry, this chat is saved. After that, we will finish helping you.
Submitted: 1 year ago.
Category: Mitsubishi
Customer: replied 1 year ago.
No current to red wire on injectors
Customer: replied 1 year ago.
Come on I put currently and the car starts
Customer: replied 1 year ago.
Customer: replied 1 year ago.
I'm just gonna cancel
Expert:  Dan replied 1 year ago.

Hello, my name is***** you still like some help?

Customer: replied 1 year ago.
Customer: replied 1 year ago.
Customer: replied 1 year ago.
Mfi relay location
Expert:  Doug replied 1 year ago.


The MFI relay is located in the long/narrow relay panel under the hood, next to the battery. It is the second from the rear relay, I am attaching a diagram of its location. You can swap the relay with a different one nearby to see if the relay is at fault; if the problem resolves you just need a new relay; if the problem maintains, there is likely a wiring issue etc.