How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 6949
Experience:  Mitsubishi employed and Factory trained ASE certified technician
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

2004 Mitsubishi Endeavor 3.8L V6 I changed the timing belt

Customer Question

2004 Mitsubishi Endeavor 3.8L V6
I changed the timing belt and had the timing marks missaligned.
Ran it for less than a minute and shut it off.
Redid the timing belt and tried it again and it ran for a minute then stalled.
Tried numerous times and no go
Hooked up scan tool and got a Crankshaft Position Sensor A Circuit malfunction.
Changed CPS and still no start.
Submitted: 1 year ago.
Category: Mitsubishi
Expert:  Tim's Auto Repair replied 1 year ago.

Hi, My name is ***** ***** for the delay.

I will do my best to assist you

sense youn get the 340 code,have you checked the timing belt again after it wouldn't start?

Related Mitsubishi Questions