How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8607
Experience:  Mitsubishi employed and Factory trained ASE certified technician
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

I have a Mitsubishi Endeavor that would not start have

This answer was rated:

I have a Mitsubishi Endeavor that would not start have change cam sensor and crankshaft sensor with OEM parts still will not start it sounds like it does want to start but it doesn't please help


Do you have spark while cranking?

Any trouble codes being set?

If you give it a few shots of starting fluid in the intake will it ignite at all?

Customer: replied 1 year ago.
it will if i give it starting fluid and the codes were crank sensor codes


Would you say that if you kept feeding it starting fluid out would continue to run?

Are the crank sensor codes no longer coming up after replacing the crank sensor?

Customer: replied 1 year ago.
I i think it would stay on but codes still come up


If the crank sensor code is continuing to come up this needs to be our primary concern.

Please remove the upper timing covers and then rotate the crankshaft by hand until the marks on the face of the cam gears align to the v notches in the valve covers behind them. Make sure both align at the same time, then look at the crank pulley and see where it's mark aligns on the plastic timing scale on the lower cover.

Customer: replied 1 year ago.
Sorry I lost you there I get off of work at 5 o'clock tomorrow afternoon so i should be around ill check to see if your here. Thanks doug

No problem

Doug and other Mitsubishi Specialists are ready to help you