How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Greg Your Own Question
Greg
Greg, Technician
Category: Mitsubishi
Satisfied Customers: 7122
Experience:  17 years shop owner, 27 year Import technician
29331485
Type Your Mitsubishi Question Here...
Greg is online now
A new question is answered every 9 seconds

Does the main crank bolt have a left and thread?

Customer Question

Does the main crank bolt have a left and thread?
Submitted: 2 years ago.
Category: Mitsubishi
Expert:  Greg replied 2 years ago.

The main crank bolt is removed anticlockwise when looking at the front so it has a right thread .

You will need a breaker par and pulley bracket to hold the pulley in place to remove the bolt .

Probably been locked in with loctite .

No need to replace the bolt .

When you replace torque down to 170 - 190Nm.

Then if needed please get back to me with the reply button, and not the poor or bad service, this way i can get back to you or suggest another expert if needed.

Your deposit does not pay me until the answer is rated in a positive way,
Not rating or a bad rating does not constitute a refund.

If you are not happy or you have sorted out your problem before the answer then please let me know with the reply button .

Kind regards Greg.

Expert:  Greg replied 2 years ago.

Just checking in to see if you managed to remove the crank bolt .

Greg

Expert:  Greg replied 2 years ago.

Just checking in to see if you managed to remove the crank bolt .

Greg