How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8608
Experience:  Mitsubishi employed and Factory trained ASE certified technician
21364095
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

What size is the on the top of the strut on a LS endeavor?

Customer Question

what size is the nut on the top of the strut on a LS endeavor?
Submitted: 2 years ago.
Category: Mitsubishi
Expert:  Doug replied 2 years ago.
Hi,
The top nut on the struts is a 17mm nut.
Also be aware that the shaft should be keyed either with a torx or an Allen hole (depending on brand etc... Mitsubishis are usually Allen if original) and it is strongly recommended that you use this to hold the shaft then use an offset wrench or offset socket to loosen the nut. If you use an impact gun you risk damaging the valve inside the strut.