How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Doug Your Own Question
Doug, ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 8594
Experience:  Mitsubishi employed and Factory trained ASE certified technician
Type Your Mitsubishi Question Here...
Doug is online now
A new question is answered every 9 seconds

How to replace the drive side power window switch in a 2004

Customer Question

How to replace the drive side power window switch in a 2004 Endeavor?
Submitted: 2 years ago.
Category: Mitsubishi
Expert:  Doug replied 2 years ago.
The 04 Endeavor is very easy to change the switch, as this year the window switch bezel is not bolted in from below... it just pops out.
Take a flat head screw driver and insert it under the bezel at the very back, from the side. With it inserted, lift up to pop the rear edge out.. it might take two strokes to pop it out all the way. Once the rear is loose, lift from the rear to pop the front edge loose.
Once the bezel is loose from the door panel you can unplug the master connector and mirror connector to remove it from the car. Then use a philips screw driver to remove the actual window switch from the bezel for replacement.
If you have any questions or need further help just let me know.