How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Don - Mo Lurch Your Own Question
Don - Mo Lurch
Don - Mo Lurch, Mitsubishi Mechanic
Category: Mitsubishi
Satisfied Customers: 21044
Experience:  16 years, Line Mechanic, Electronics trouble shooting, etc
Type Your Mitsubishi Question Here...
Don - Mo Lurch is online now
A new question is answered every 9 seconds

Mitsubishi Montero Sport LS: where can I get a wiring schematic

Customer Question

where can I get a wiring schematic for the ac system in a 98 Montero sport?
Submitted: 2 years ago.
Category: Mitsubishi
Expert:  Don - Mo Lurch replied 2 years ago.
I can post Manual Air Condition Schematicswill that help?
Customer: replied 2 years ago.
Expert:  Don - Mo Lurch replied 2 years ago.
sorry for the delay.............Greetings...... “Hi, I’m Don (akaCustomer and I look forward to helping you!”.Here is what Factory Service Manual showsclick Attachments below.IF you need more information, please ask "prior" to Rating.. Please take a moment to rate my service so that I can get credit for my time.NOTE: Do NOT Rate on how much TIME you waited, because I am not on 24 / 7 and I answer as soon as I see the question.The question will still remain open for follow up questions if needed..Rating is very Important to our Service.
Expert:  Don - Mo Lurch replied 2 years ago.
was that what you needed?
please respond
Customer: replied 2 years ago.
I traced out the system and 12 volts is at the ac clutch relay and 12 volts is also at the coil of the relay. how can you find out if the signal is coming out of the Engine control module to the relay?
Expert:  Don - Mo Lurch replied 2 years ago.
ECM, Dual Pressure Switch & Temp Switch supplies a Ground for the Compressor to come on, thru the ECM