How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask George H. Your Own Question
George H.
George H., ASE Certified Technician
Category: Mitsubishi
Satisfied Customers: 18664
Experience:  ASE Master tech 15+ years
Type Your Mitsubishi Question Here...
George H. is online now
A new question is answered every 9 seconds

Mitsubishi outlander: I need to know which cables lead the

Customer Question

I need to know which cables lead the IAT sensor in mi Mitsubishi outlander 2008
Submitted: 2 years ago.
Category: Mitsubishi
Expert:  George H. replied 2 years ago.
Hello, I have US information, please check and see if the same wire colors are present on your vehicle.
The IAT is the violet and the black/white stripe that are in the #1 and #4 positions of the mass air sensor connector. Those are the outside two wires on the connector
Let me know if that is what you see on this engine and if not which engine you have in your outlander.
Thank you
Customer: replied 2 years ago.

Ok thanks for your quickly answer. there are the colors on that positions, the violet is first position and the black stay on 4 position

Expert:  George H. replied 2 years ago.
Good, those are the wires that you need. Should be a white and a blue for the inner wires.
Please let me know if you have further questions
Thank you