Mitsubishi

Mitsubishi repair problems? Ask a mechanic for answers ASAP

Connect one-on-one with {0} who will answer your question

Related Mitsubishi Questions
Mitsubishi Galant: I have an 05 galant with a 2.4 that is
I have an 05 galant with a 2.4 that is blown up. what is the step by step for swapping the motor and also timing belt, thanks… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Eclipse GSX: Hey doug Im going to replace my water
Hey doug Im going to replace my water pump in a few days and was wondering if you could walk me through it. Its a 99 eclipse awd gsx 2.0 turbo with 100k miles. Do I have to take the timing belt off? S… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
I ended up having the head rebuilt. installed it and runs fine
I ended up having the head rebuilt. installed it and runs fine except engine has a vibration.When I changed the balance belt, could I be 180 degrees off where the balance shaft turns 2 times to 1 time… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi ecplise: just replaced the timing belt on a 1997
just replaced the timing belt on a 1997 eclipse 2.0 TURBO / now after it runs for about a mile or less the oil light is on and the gage is a 0 / when you start the car the oil presure is fine . there … read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
mitsubishi galant: I have a Mitsubishi galant ES yr 2000. I
I have a Mitsubishi galant ES yr 2000. I have replaced the timing belt and the balancer belt. I was indeed very careful not to miss any alignment marks on each of the four sprockets( camshaft, cranksh… read more
George H.
George H.
ASE Certified Technician
Associate Degree
321 satisfied customers
mitsubishi evo 8: i have mitsubishi evo 8 2003 , the small
i have mitsubishi evo 8 2003 , the small timing belt on it broke of while i was driving, car stopped & turned off, i bought the belt put it on and tried to start the car but did the same thing. do i h… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
colt: setting of balancing wheel belt and setting of main timming..4x2
setting of balancing wheel belt and setting of main timming on 2.4i colt rodeo model 2002 4x2 double cab with a scetch… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2.4: timing belt, so the crank has turned..cam..oil pump
next question, the teeth stripped on the timing belt, so the crank has turned alone, how do I determine that the cam and the oil pump is not 180 degrrees out of time ? still working on 2004 mit. galan… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2.4: replace timing belt, where can I get a timing diagram
2004 mits. galant 2.4, I need to replace timing belt, where can I get a timing diagram or do you have instructions… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
1997 Mitsubishi Galant ES: loud..power steering pump bearing were gone
I changed the timing belts on my 1997 Mitsubishi Galant ES 2.4 SOHC. when i started it the car belts were screaming so loud. I ask earlier another mechanic what it was and said the power steering pump… read more
Mike Kelly
Mike Kelly
Auto Mechanic
Vocational, Technical or Trade Scho
2,509 satisfied customers
2002 mitsubishi: u can get me a diagramm of timing belt marks..cyl
hi there if u can get me a diagramm of timing belt marks for 2002 mitsubishi galant.2.4 engine 4 cyl. please… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2003 Galant: the balancing shaft..SOHC..wrench..hole
In the process of aligning the balancing shaft on my 2003 Galant (2.4 SOHC) using the plug behind the exhaust manifold. No problem inserting an allen wrench all the way into the hole (2.5 to 3 inches.… read more
George H.
George H.
ASE Certified Technician
Associate Degree
321 satisfied customers
mitsubishi galant: cylinder block plug...installed a new timing
where is the cylinder block plug. we just installed a new timing belt for a mitsubishi galant 2001… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Galant I am changing a timing belt on a 2003 mitsubishi
I am changing a timing belt on a 2003 mitsubishi galant 2.4l I can not find where u insert the srewdriver for oil pump sprocket is on the front where the timimg belt is or on the side of block. Please… read more
George H.
George H.
ASE Certified Technician
Associate Degree
321 satisfied customers
Mitsubishi Outlander timing belt ribs missing. jumped out
timing belt ribs missing. jumped out of time. is timing procedure the same as replacing timing belt that has not jumped out of time… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
Mitsubishi Eclipse Spyder GS I have a 2002 eclipse spyder
I have a 2002 eclipse spyder Timing belt broke at a light when I was stoped. Was told didnt hurt anything and was lucky. But now Im getting a really bad vibration all over the car. had motor mounts re… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2.4: petrol..have an oil leak..timing belt..gear to the crankshaft
I ahve a 2000 triton 2.4 petrol and i have an oil leak from behind a small gear driven off the smaller belt in the front of the engine( not driven by the timing belt)inside the timing gear case. My qu… read more
Doug
Doug
ASE Certified Technician
Vocational, Technical or Trade Scho
7,006 satisfied customers
2000 Galant: timing belt..I rotated the crank..valves..piston
I am trying to install a new timing belt on a 2000 Galant with the 2.4 SOHC engine. I rotated the crank without the belt hooked up. How can I be sure the cam timing is right so that the valves open at… read more
George H.
George H.
ASE Certified Technician
Associate Degree
321 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

I would (and have) recommend your site to others I was quite satisfied with the quality of the information received, the professional with whom I interacted, and the quick response time. Thanks, and be sure that I'll be back whenever I need a question answered in a hurry.

Stephanie PElm City, NC

used your service this weekend with "Trecers" help. thank you ,thank you, thank you. replaced an A/C fan motor. Local Auto Zone had part. $15.00 "tracer" fee and $40.00 for parts, I saved several hundreds of dollers at a shop. i will recommend you and use you in the future.

David L.Richmond, TX

9 dollars, 2 hours of my time, and I drove away. Your diagnosis was right on the mark. Thank you so much.

PhilMarysville, CA

Lurch. Thank you very much. I had real doubts about this website but your promptness of response, quick followup and to the point answer with picture was incredible.

CharlesWalnut Creek, CA

As a single woman, I really appreciate an excellent and affordable opinion.
Thank you Geordie, I will not hesitate to contact justanswer in the future!

SueCharleston, WV

Another great insight to what may be the problem. I will have my mechanic take a look at it tomorrow. Thanks again, Frank...you do indeed know your stuff.

JimCastleberry, FL

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

< Previous | Next >

Meet the Experts:

Doug

Doug

ASE Certified Technician

7,006 satisfied customers

Mitsubishi employed and Factory trained ASE certified technician

Chris (aka- Moose)

Chris (aka- Moose)

Technician

373 satisfied customers

24 years of experience diagnosing & repairing

George H.

George H.

ASE Certified Technician

321 satisfied customers

ASE Master tech 15+ years

Tim Mohr

Tim Mohr

ase master

230 satisfied customers

30 yrs foriegn and domestic, gas and diesel

Don - Mo Lurch

Don - Mo Lurch

Mitsubishi Mechanic

60 satisfied customers

16 years, Line Mechanic, Electronics trouble shooting, etc

AMD

AMD

Master Technician

48 satisfied customers

L1 Advanced Level Diagnostics Specialist

BigBob

BigBob

Service manager/Technician

46 satisfied customers

25 years in the auto repair business

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x