How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask AZTechBrian Your Own Question
AZTechBrian
AZTechBrian, ASE Certified Technician
Category: Mercury
Satisfied Customers: 708
Experience:  Owner
77606712
Type Your Mercury Question Here...
AZTechBrian is online now
A new question is answered every 9 seconds

07 mountaineer and need wiring colors for shift solenoid

Customer Question

07 mountaineer and need wiring colors for shift solenoid pack connector
Submitted: 1 year ago.
Category: Mercury
Expert:  AZTechBrian replied 1 year ago.

Hello. Let me take a look and see if I have a connector pinout diagram for you. How many pins are there on that connector?

Customer: replied 1 year ago.
Expert:  AZTechBrian replied 1 year ago.

oh nice! thank you. Give me just a minute.

Expert:  AZTechBrian replied 1 year ago.

This should be what your looking for.

CONNECTOR DIAGRAM

Customer: replied 1 year ago.
But I need colors I have no idea where these wires go
Expert:  AZTechBrian replied 1 year ago.

the colors are listed under the circuit column. ye-bl is yellow with a blue line, etc.

Expert:  AZTechBrian replied 1 year ago.

the first abbreviation of the two is always the main wire color. If there is a second abbreviation then that is the color of the line. If you get stuck on one, please ask me and I'll help you decode it.

Customer: replied 1 year ago.
I don't have 4 of the colors
Expert:  AZTechBrian replied 1 year ago.

i'm sure you do. They have probably changed in appearance due to their age. That is extremely common. Do you have the same amount of wires as the diagram shows?

Customer: replied 1 year ago.
I figured out some only one left and it's pin 3 diagram said it should be grn/blu and on vehicle it is grey/blu
Expert:  AZTechBrian replied 1 year ago.

On the diagram, pin 3 says gray and blue, so your good. that's the right wire.

Expert:  AZTechBrian replied 1 year ago.

Did you get the wires back in the connector successfully?