How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Ron Your Own Question
Ron
Ron, ASE Certified Technician
Category: Mercury
Satisfied Customers: 35527
Experience:  ASE Certs and Ford Certs
7276279
Type Your Mercury Question Here...
Ron is online now
A new question is answered every 9 seconds

How to remove dashboard on 2010 Mercury Mariner

Customer Question

How to remove dashboard on 2010 Mercury Mariner
Submitted: 1 year ago.
Category: Mercury
Expert:  Ron replied 1 year ago.
Hello, my name is ***** ***** I am a professional here at Just Answer. I have noticed that your question was not getting a response and thought I would see if you still need help with this.I apologize for the delay and I hope I can still assist you with this here.
I have enclosed the instrument panel removal steps in the link below, copy and paste the link below to open and view it. Take a look and post back if you need the console removal step and or more help.
https://dl.dropboxusercontent.com/u/104923897/Instrument%20Panel%20Mar%20Aug%2011.pdf
Customer: replied 1 year ago.
Hi Ron, Thanks for responding to my question. I'm trying to replace the evaporator temperature sensor behind the dashboard. I've had the instrument cluster out but not the steering wheel. I took the side and floor trim panels off, and removed the 4 side bolts. I'm stuck on removing the plastic covering of the center console and what's holding the dashboard near the windshield.
Expert:  Ron replied 1 year ago.
See if this is the sensor you are replacing. see the link below.
https://dl.dropboxusercontent.com/u/104923897/Temo%20sesnsor%20Aug%2013.pdf
If this is the sensor you do not need to remove the complete instrument panel.
Customer: replied 1 year ago.
No that is not the sensor I'm replacing. I'm replacing the A/C evaporator temperature sensor behind the dashboard
Expert:  Ron replied 1 year ago.
Okay then the instrument panel has to come off, are you having problem with the instrument panel removal steps I sent you?
Customer: replied 1 year ago.
the center console covering is not detaching from under the bottom front and can't find what's holding it. Also are there any tabs under the glass that need to be pulled so the panel will fall out?
Expert:  Ron replied 1 year ago.

So are you needing the center console removal steps, it does have to come off.

Expert:  Ron replied 1 year ago.

See the console steps in the link below.

https://dl.dropboxusercontent.com/u/104923897/Console%20Aug%2015.pdf

Customer: replied 1 year ago.
Ok. I've got the Center console and was going back to your first instructions to remove the instrument panel. I clicked your link and it gives me an error code. https://dl.dropboxusercontent.com/u/104923897/Instrument%20Panel%20Mar%20Aug%2011.pdf
Customer: replied 1 year ago.
Can you please repost the PDFs? Thanks
Customer: replied 1 year ago.
Original Dropbox link is broken. Please repost.
Expert:  Ron replied 1 year ago.
See the instrument cluster in the link below, please be sure to print it out as it will time out over time.
https://dl.dropboxusercontent.com/u/104923897/Instrument%20Panel%20Aug%2017.pdf
Customer: replied 1 year ago.
Please send section 501-02 and section 501-16.
Expert:  Ron replied 1 year ago.

See the two links below.

https://dl.dropboxusercontent.com/u/104923897/Cowl%20pane%20Aug%2017.pdf

https://dl.dropboxusercontent.com/u/104923897/Wiper%20pivot%20Aug%2017.pdf