How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Dan Your Own Question
Dan, Technician
Category: Mercury
Satisfied Customers: 24587
Experience:  Independent Shop Experience, 2 Year Automotive Diploma, & Access to Information Database
Type Your Mercury Question Here...
Dan is online now
A new question is answered every 9 seconds

I have a code that came up P1401 that on my mercury mountaineer

Resolved Question:

i have a code that came up P1401 that on my mercury mountaineer
Submitted: 6 years ago.
Category: Mercury
Expert:  Dan replied 6 years ago.

Welcome to JustAnswer, my name is XXXXX XXXXX I'm here to help get your problem resolved. Ask follow up questions, thanks.


This code usually means the DPFE sensor has failed.


P1401 DPFE Sensor Circuit High Voltage

Possible CausesSetting Conditions
  • DPFEGR sensor connector is damaged (check pins for damage, and moisture)
  • DPFEGR signal circuit is open or shorted to voltage
  • DPFEGR return circuit is open
  • DPFEGR sensor has failed
  • PCM has failed
Key on or engine running; and the PCM detected the DPF EGR sensor signal was more than the maximum calibrated value of 4.50v. Note: The DPF EGR PID will read more than 4.5v with this code set.

This code sets in 2 Trip(s).
This code will turn on the MIL (Malfunction Indicator Lamp)

Dan and 4 other Mercury Specialists are ready to help you