How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Richard Your Own Question
Richard, Mercury Technician
Category: Mercury
Satisfied Customers: 15522
Experience:  12 years at a Ford Lincoln/Mercury and Jaguar dealer as a technician and shop foreman.
Type Your Mercury Question Here...
Richard is online now
A new question is answered every 9 seconds

Proceedure for replacing fuel pump on 2000 mercury sable?

Customer Question

Proceedure for replacing fuel pump on 2000 mercury sable?
Submitted: 7 years ago.
Category: Mercury
Expert:  Richard replied 7 years ago.

Hello and welcome to


You will need to drop out the fuel tank to remove and replace the fuel pump. There is a special tool to remove the locking ring but you can do this with a flat blade screwdriver and small hammer. Click on the links.





Customer: replied 7 years ago.
I have dropped the tank and removed the fuel pump hosing, i have remove two retaing screwss on f/p but cannot get the pump out of the housing. can you advise?
Expert:  Richard replied 7 years ago.
The fuel pump, sender and housing are replaced as an assembly.
Richard and other Mercury Specialists are ready to help you
Customer: replied 7 years ago.
Your answer were correct, when I returned to accept the accept button was not on my screen, however when I receiced your email today the accept button was displayed and I accepted ,Thank You
Expert:  Richard replied 7 years ago.
Your welcome. Thanks for the accept and for using