How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site. Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask sprinkles08 Your Own Question
sprinkles08, ASE Certified Technician
Category: Mercedes
Satisfied Customers: 23004
Experience:  ASE Master and Advanced level certified. Factory trained with 15 years dealership experience
Type Your Mercedes Question Here...
sprinkles08 is online now
A new question is answered every 9 seconds

Minor accident my 2005 Mercedes Benz 500SLI replace a ABS

Customer Question

Minor accident my 2005 Mercedes Benz 500SLI replace a ABS pump because it was leakingNow I have no power to my rear brakesDo airbags were deployed
Submitted: 1 year ago.
Category: Mercedes
Expert:  sprinkles08 replied 1 year ago.

Hello and welcome to JustAnswer!

If the rear brakes have no fluid flow after replacing the ABS hydraulic control unit the problem may be with the replacement part or it could be from improper bleeding procedure. If the part was new then it shoudln't be an issue but if it was used or something like an aftermarket reman then it's suspect.

Where did the part come from?
How was it bled?