How JustAnswer Works:
  • Ask an Expert
    Experts are full of valuable knowledge and are ready to help with any question. Credentials confirmed by a Fortune 500 verification firm.
  • Get a Professional Answer
    Via email, text message, or notification as you wait on our site.
    Ask follow up questions if you need to.
  • 100% Satisfaction Guarantee
    Rate the answer you receive.
Ask Marty Your Own Question
Marty, Mercedes Technician
Category: Mercedes
Satisfied Customers: 53940
Experience:  Bosch Certified Master Tech. Over 35 years experience.
Type Your Mercedes Question Here...
Marty is online now
A new question is answered every 9 seconds

Had to repair my wiper bracket, now the wiper wont even go,

Customer Question

Had to repair my wiper bracket, now the wiper wont even go, its slams down on one side and then stops working. The motor is fine and none of the splines are stripped
JA: Have you checked the fuses? Do you know if there is power to the wiper motor? What is the model/year of your Mercedes?
Customer: Yes i just plugged the motor in and works like a dream, i have a 1997 mercedes C28 280* Im scratching my head on this one... Its almost like it needs to be aligned
JA: OK. Got it. I'm sending you to a secure page on JustAnswer so you can place the $5 fully-refundable deposit now. While you're filling out that form, I'll tell the Mercedes Mechanic about your situation and then connect you two.
Submitted: 1 year ago.
Category: Mercedes
Expert:  Marty replied 1 year ago.

Hi, my name is***** you remove the motor from the linkage when you were doing the repair. If you did you will need to retime the motor to the linkage.

Expert:  Marty replied 1 year ago.

Let me know if you need more help with this.

Customer: replied 1 year ago.
I did and have repeated my steps over and over again, still is not working...
Expert:  Marty replied 1 year ago.

You must not be timing it correctly. How are you doing it?

Related Mercedes Questions