Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

Kenworth C15 Acert engine. Jakes and cruise are inop. All…

Customer Question
Kenworth C15 Acert engine...

Kenworth C15 Acert engine . Jakes and cruise are inop . All switches in dash are good. Clutch pedal switch is good.Throttle positrioin switch is good . Relay and fuse is good . By jumping the #5 wire to the # 22 wire at the ecm the clutch pedal switch goes to the off position in Cat ET. Otherwise the clutch pedal switch shows on always.

Mechanic's Assistant: What's the make/model/year of your truck? Engine type?

Kenworth T800 C15 Acert engine

Submitted: 2 years ago.Category: Medium and Heavy Trucks
Show More
Show Less
Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 2 years ago
Ok let's do this
Answered in 21 hours by:
5/3/2020
Technician: AMANDEEP MAHERU,
 replied 2 years ago
AMANDEEP MAHERU
Category: Medium and Heavy Trucks
Satisfied Customers: 78
Experience: AUTOMOTIVE TECH at AZ DIESEL SOLUTION
Verified
Hello I will help you out here
Have you checked what voltage you are getting at the clutch pedal
Are you getting ground at common terminal at the clutch switch
Ask Your Own Medium and Heavy Trucks Question
Technician: AMANDEEP MAHERU,
 replied 2 years ago
Did the ground pass onto the other terminal when you depress clutch
Ask Your Own Medium and Heavy Trucks Question
Customer reply replied 2 years ago
It is actually done. I repaired a wire deep in the dash
Technician: AMANDEEP MAHERU,
 replied 2 years ago

Glad to hear that you make it to work

Ask Your Own Medium and Heavy Trucks Question
Was this answer helpful?

How JustAnswer works

step-image
Describe your issueThe assistant will guide you
step-image
Chat 1:1 with a technicianLicensed Experts are available 24/7
step-image
100% satisfaction guaranteeGet all the answers you need
Ask AMANDEEP MAHERU Your Own Question
AMANDEEP MAHERU
AMANDEEP MAHERU
AMANDEEP MAHERU
Category: Medium and Heavy Trucks
Satisfied Customers: 78
78 Satisfied Customers
Experience: AUTOMOTIVE TECH at AZ DIESEL SOLUTION

AMANDEEP MAHERU is online now

Related Medium and Heavy Trucks Questions
I have a catepillar 3406e Serial 2ws20176 i need a ecm pin
I have a catepillar 3406e Serial 2ws20176 i need a ecm pin out 70 pin My jake abd cruise don't work and i have et Showing service brake pedal on I check the brake switch and is good… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
T800 no dash gauges working 2007 kenworth t800 has no dash
T800 no dash gauges working 2007 kenworth t800 has no dash guages working. Will show mileage with key off, but not with key on. VIN *****************… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
I have a 2002 kenworth t800 with a c10 cat engine. The jake
I have a 2002 kenworth t800 with a c10 cat engine. The jake brake will only work if the cruise control switch is in the off position. Cruise control does not work either, however, when the truck is pa… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
I have a 6nz cat in a kenworth that i am fighting jake brake
i have a 6nz cat in a kenworth that i am fighting jake brake issues with it, the truck had a smart wheel in it, but someone before me has deleted the smart wheel and put jake brake switches on the das… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
Jakes won't work c15 cat 2004 KW 900l Have replaced dash
jakes won't work c15 cat 2004 KW 900l Have replaced dash switches clutch switch works. every once in a while the jakes will come on but not very often … read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
I have a 2006 Peterbilt 387 with a MXS C 15 engine. My
I have a 2006 Peterbilt 387 with a MXS C 15 engine. My engine brake is not working and have been troubleshooting on my own with no luck. Cruise control works on idle. What can I do to start and rule o… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
I'm looking for the cruise control wiring diagram for a 2001
I'm looking for the cruise control wiring diagram for a 2001 Kenworth T800 last 6 of vin# ***** *****? It turns off randomly and can turn it back on and sometimes it stays on for a while and sometimes… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
2006 kw t8. The jake brake will not turn on. No light on
2006 kw t8. The jake brake will not turn on. No light on dash or anything. The buttons on the steering wheel and the clock spring under the steering wheel have been replaced … read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
No cruise on 2005 peterbilt with c15, have et, cruise on/off
no cruise on 2005 peterbilt with c15, have et, cruise on/off works, clutch and brake switch both show off, but on et where it says cruise mode, it says not activated… read more
Nich1019
Nich1019
Diesel Technician
Vocational, Technical or Trade School
80 satisfied customers
1997 kenworth t800 with Cummins m11. Bought truck found for
1997 kenworth t800 with Cummins m11. Bought truck found for unknown reason the owner swapped out the instrument levers on the right side … read more
cumminsdr
cumminsdr
Mechanic
High School or GED
1,886 satisfied customers
Installing 5ek 3406e On a 2008 kenworth t800 that has a c15
Installing 5ek 3406e On a 2008 kenworth t800 that has a c15 SDP engine … read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
I have a 2005 Kenworth t800 with a Cummins ISX. The engine
I have a 2005 Kenworth t800 with a Cummins ISX. The engine brake and cruise control are not working. The clutch switch was broken so we replaced it. The engine brake on off switch was intermittent and… read more
Mike Mcmillan
Mike Mcmillan
Triage Tech/Shop Foreman
Associates
604 satisfied customers
Cruise not working, 2001 379 peterbilt cat 6nz, traced wires
traced wires and switches checked ecm found ecm has service brake ON new switch also found wire 281 has power not sure why … read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
I have two questions, first one is my Jake brake won't shut
I have two questions, first one is my Jake brake won't shut off it is on the steering wheel, on a w900 kenworth with a c-15 cat, also when I am in the lower set of gears my rpms seem to have a rev lim… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
2006 western star 4900fa cruise control and engine brake quit
2006 western star 4900fa cruise control and engine brake quit after truck warms up. both work fine prior to warm up. looking for schematics and or theory of operation. vehicle has new clutch switch, s… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
6,062 satisfied customers
Have a c15 2007 same deal fuel delivery is good will crank
Have a c15 2007 same deal fuel delivery is good will crank over just will not fire up owner drove truck to location shut it off did his farming and truck will not crank up now… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
I have a 2002 kenworth with a c15 in it with code 42 and the
I have a 2002 kenworth with a c15 in it with code 42 and the cruise wont work the cruise is stuck flashing the code… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
I have a 1996 W900L with an engine retarder brake problem.
I have a 1996 W900L with an engine retarder brake problem. This unit originally had a smart wheel, but the switches has worn out and the replacement wheel is no longer available. The unit has been con… read more
Cat Man
Cat Man
Cat Engine Expert
Vocational, Technical or Trade Scho
5,353 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

6,062 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,353 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

5,115 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,756 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

Curtis B.

Curtis B.

Technician

1,947 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

cumminsdr

cumminsdr

Mechanic

1,886 satisfied customers

All types of Cummins applications

Chris (aka-Moose)

Chris (aka-Moose)

Technician

641 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x