Medium and Heavy Trucks

Have truck repair questions? Ask an Expert

Connect one-on-one with {0} who will answer your question

Related Medium and Heavy Trucks Questions
I HAVE A 2007 INTERNATIONAL 4300 DT466. HAVE CODES SID 254
I HAVE A 2007 INTERNATIONAL 4300 DT466. HAVE CODES SID 254 FMI 6 AND 221 FMI 4. IHAVE TESTED ALL THE WIRING FROM BATTERIES TO PLUG BY THE STARTER. I AM LOOKING FOR A WIRING DIAGRAM TO CHECK ANY OTHER … read more
Bradey V
Bradey V
Certificate
Got the clean power harness in. The plugs by the starter
Got the clean power harness in. The plugs by the starter have been cut off. The harness I got has 3 red wires on one plug and two white on the other. The harness by the starter has 1 violet, 1 red and… read more
Mike Mcmillan
Mike Mcmillan
Shop Foreman/Triage Tech
Associates
3,946 satisfied customers
We have an 05 international 4300 DT466 with high to low side
We have an 05 international 4300 DT466 with high to low side open on all injectors and idm relay voltage low only under acceleration. … read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
2006 international 4300 with a 368 code, no 12volts to the
2006 international 4300 with a 368 code, no 12volts to the egr module. trying to compare my issue to someone that has had the same problem but seems as though my wiring may be a lil different… read more
Mike Mcmillan
Mike Mcmillan
Shop Foreman/Triage Tech
Associates
3,946 satisfied customers
I have a 2005 4300 International with a 466 engine with
I have a 2005 4300 International with a 466 engine with codes 421-426 . I have checked the grounds on the injector harness plugs and they do not light up a test light to positive. Where do I check fro… read more
Mike Mcmillan
Mike Mcmillan
Shop Foreman/Triage Tech
Associates
3,946 satisfied customers
I have 2003 International 4200 truck with VT 365 engine.
I have 2003 International 4200 truck with VT 365 engine. Brand new engine Vin # 3H584178. I need the correct electrical diagnostic wiring schematic and how troubleshoot the IDM relay and Iso relay for… read more
Andy
Andy
truck /coach technician
Vocational, Technical or Trade School
207 satisfied customers
Trying to locate fuses for turn signals and hazard lights on
Trying to locate fuses for turn signals and hazard lights on 2007 International 4300 … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
I THINK WE ARE HAVING THE SAME PROBLEM AS IN THIS THREAD.
I THINK WE ARE HAVING THE SAME PROBLEM AS IN THIS THREAD. WHAT IS THE WIRE IN THE 12 PIN HARNESS WE NEED TO HAVE 12 VOLTS ON? WHERE IS THE PLUG LOCATED? … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
2007 International 4300 dt466 IDM Relay circuit low voltage,
2007 International 4300 dt466IDM Relay circuit low voltage, no start. blown fuse 25amp at battery. 3rd visit for this issue. IDM relay replaced. 3 way connector bypassed at battery. May have possible … read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
524 satisfied customers
I have a 1998 international 9400 CUMMINS N14. Last 8 VIN
I have a 1998 international 9400 CUMMINS N14. Last 8 VIN WC056985. THE SPEEDOMETER AND GAGES CYCLE UPON KEY ON BUT THE SPEEDOMETER AFTER RETURNING TO 0MPH FALLS TO 6 OCLOCK POSITION. HAVE VERIFIED ECM… read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
524 satisfied customers
I'm working on 2006 International 4300 truck, with a propane
Hello, I'm working on 2006 International 4300 truck, with a propane tank. complaint is that PTO is not working. The cruise control on steering wheel works to raise engine RPM. PTO does not in engage, … read more
Alex Olsen
Alex Olsen
auto/diesel/industrial
524 satisfied customers
2004 International 4300, Check A/C. Have replaced control
2004 International 4300, Check A/C. Have replaced control head, door actuator, blower resistor, no luck. Code is 1:5 613_14A… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
I'm working on a 2007 International 4300. The fan blows
I'm working on a 2007 International 4300. The fan blows but the a/c compressor won't come on. There is no power to the plug. The fuses are good in the dash on passenger side and also the distribution … read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
I have a '07 4300 dt466 with air brakes & low power problem,
I have a '07 4300 dt466 with air brakes & low power problem, start off & you have to let off accelorator to get trans to upshift, but still no power, engine ***** *****ght is on and dash display is wa… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
We have a International box truck 4300 and the running lights
We have a International box truck 4300 and the running lights are not working? He has tail lights and head lights. I read on an old forum and he is checking the brown and blue plug, if not that what c… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
have code sid 221 fmi4 and 254 fmi 6, have tried test idm and
have code sid 221 fmi4 and 254 fmi 6, have tried test idm and checked the power and grounds from the battery up to ecu stumped cant find a wire diagram for ecu power 2007 int 4200 with the vt365… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
2000 international medium duty truck, with I believe ISM CM
2000 international medium duty truck, with I believe ISM CM 570 cummins. Has code 241 and also the dash sometimes cycles, oil Guage speedometer and fuel gauge work sometimes. The VSS sensor is new.… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
I have a 2007 international 4300 with jerrdan rollback bed ,
I have a 2007 international 4300 with jerrdan rollback bed , when I work the bed and the winch , high idle usually kicks in automatic when the levers are pressed . It has stoped working , I have chang… read more
Daniel Wilson
Daniel Wilson
Auto Mechanics 1&2/diesel mech
4,737 satisfied customers
Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

JustAnswer in the News:

Ask-a-doc Web sites: If you've got a quick question, you can try to get an answer from sites that say they have various specialists on hand to give quick answers... Justanswer.com.
JustAnswer.com...has seen a spike since October in legal questions from readers about layoffs, unemployment and severance.
Web sites like justanswer.com/legal
...leave nothing to chance.
Traffic on JustAnswer rose 14 percent...and had nearly 400,000 page views in 30 days...inquiries related to stress, high blood pressure, drinking and heart pain jumped 33 percent.
Tory Johnson, GMA Workplace Contributor, discusses work-from-home jobs, such as JustAnswer in which verified Experts answer people’s questions.
I will tell you that...the things you have to go through to be an Expert are quite rigorous.

What Customers are Saying:

Wonderful service, prompt, efficient, and accurate. Couldn't have asked for more. I cannot thank you enough for your help.

Mary C.Freshfield, Liverpool, UK

This expert is wonderful. They truly know what they are talking about, and they actually care about you. They really helped put my nerves at ease. Thank you so much!!!!

AlexLos Angeles, CA

Thank you for all your help. It is nice to know that this service is here for people like myself, who need answers fast and are not sure who to consult.

GPHesperia, CA

I couldn't be more satisfied! This is the site I will always come to when I need a second opinion.

JustinKernersville, NC

Just let me say that this encounter has been entirely professional and most helpful. I liked that I could ask additional questions and get answered in a very short turn around.

EstherWoodstock, NY

Thank you so much for taking your time and knowledge to support my concerns. Not only did you answer my questions, you even took it a step further with replying with more pertinent information I needed to know.

RobinElkton, Maryland

He answered my question promptly and gave me accurate, detailed information. If all of your experts are half as good, you have a great thing going here.

DianeDallas, TX

< Previous | Next >

Meet the Experts:

Daniel Wilson

Daniel Wilson

4,737 satisfied customers

Owner at DJ Wilson

Cat Man

Cat Man

Cat Engine Expert

5,234 satisfied customers

I am ASE Master Truck Certified.

Wayne

Wayne

Journeyman

4,023 satisfied customers

worked on, Gmc, Macks, Freight liner,Mercedes Benz,,Ford, sterling

Jeremy

Jeremy

Certified Truck/Bus Technician

2,740 satisfied customers

ASE Med/HD Truck Technician, NATEF Diesel Engines and Electrical/Electronics Technician, Network Engineer specializing in CAN faults, Aftertertreatment, and vehicle communications

cumminsdr

cumminsdr

Mechanic

1,700 satisfied customers

All types of Cummins applications

Curtis B.

Curtis B.

Technician

1,571 satisfied customers

Technician turned service manager on multiple lines of trucks and engines, used in industry.

Chris (aka-Moose)

Chris (aka-Moose)

Technician

353 satisfied customers

24 years of experience diagnosing & repairing

< Previous | Next >

Disclaimer: Information in questions, answers, and other posts on this site ("Posts") comes from individual users, not JustAnswer; JustAnswer is not responsible for Posts. Posts are for general information, are not intended to substitute for informed professional advice (medical, legal, veterinary, financial, etc.), or to establish a professional-client relationship. The site and services are provided "as is" with no warranty or representations by JustAnswer regarding the qualifications of Experts. To see what credentials have been verified by a third-party service, please click on the "Verified" symbol in some Experts' profiles. JustAnswer is not intended or designed for EMERGENCY questions which should be directed immediately by telephone or in-person to qualified professionals.

Show MoreShow Less

Ask Your Question

x